Gate Repair in Burleson - Same-Day Repair, Priced Before We Start

Fast, Reliable Gate Repair Across Burleson

Gate repair in Burleson typically costs $180 – $640 for most opener, hinge, and alignment work, and we can usually have a technician on your property the same day you call. The city’s mix of newer automatic driveway gates on master-planned streets and older welded pipe gates on ranch properties means the failure points are predictable, and we know what to check first. Call (817) 840-7067 if a gate is stuck open, grinding, or refusing to close. Every job gets a written price before work starts, and every repair is covered by a written one-year guarantee.

Call (817) 840-7067

We work across Burleson regularly, from the newer developments around Hidden Creek Parkway and Alsbury Boulevard to the older acreage properties off Renfro Street and the roads running east toward I-35W. A technician who knows this city knows that the gate opener that came with a 2015 house is not the same job as the sagging pipe gate on a property that once held horses. That local knowledge changes which parts we carry on the truck and how we sequence the work.

Why Carver Gate Repair Fort Worth Is Burleson’s Preferred Gate Repair Company

Burleson homeowners tend to be particular about who works on their gate. They have dealt with no-show contractors and quotes that grow after the first hour. Our process strips both of those problems out. You call (817) 840-7067, a live person answers, and a background-checked, uniformed technician is dispatched with a specific arrival window. The price is written down and handed to you before any tool comes out. If the repair fails within a year, we return at no cost. That is the Garrison Standard, and it has been the operating rule since 2008.

Our techs are trained on the operators common in this part of Johnson County, including Linear, Ghost Controls, and Viking equipment that shows up on Burleson properties. We do not send a generalist who last worked on a garage door and figures it out on your dime. Gate Repair is the only thing we do, across residential and commercial jobs. Burleson is part of our regular dispatch area out of the Dallas-Fort Worth office, so scheduling is straightforward and response times are short.

The reviews from Burleson customers consistently mention two things: the tech showed up when promised, and the price did not move. That is not an accident. It is how Lonnie Burke runs the crew, and it is the baseline every technician is held to.

Gate Welding in Burleson

Gate welding in Burleson is a routine part of what we do, especially on the older pipe gates that still stand on the long-held properties along County Road 528, Renfro Street, and the stretches of Alsbury that thread past the older subdivisions. These gates were built for tractors and livestock, not just cars, and they develop failures that no opener adjustment can solve. Hinge posts lean, welds crack, and the top rail starts to bow from decades of use without proper hinge reinforcement.

Most Burleson welding jobs fall into two categories. The first is reinforcing a sagging hinge post by cutting the existing welds, resetting the post in concrete, and re-welding the hinges in true alignment. The second is repairing cracked welds along the gate frame itself, which happens more often on wide driveway gates that carry a lot of wind load during spring storms. A typical hinge-and-post welding repair in Burleson runs $320 – $720 depending on post condition and gate weight. Full frame reinforcement on a wide pipe gate can reach $900 – $1,400 when multiple sections need new gussets and cross braces.

Post Reset and Hinge Alignment

When a post leans, the entire gate shifts. You can hear it: the opener strains, the gate scrapes the ground, and the latch no longer lines up. We reset the post in concrete, re-weld the hinge barrels, and confirm the gate swings smoothly through its full travel before touching any opener components. Doing the welding first means the opener is not fighting a misaligned gate.

Cracked Weld Repair on Pipe Gates

Hairline cracks at weld joints are common on older Burleson ranch gates, especially where the top rail meets the vertical stiles. We grind out the old weld, prep the steel, and lay a full-penetration weld. The gate is then painted or primed to match. This kind of repair usually runs $220 – $480 per location and takes one visit.

Commercial Gate Repair in Burleson

Commercial gate repair in Burleson covers the sliding gates and swing operators at business entries, industrial lots, and the retail and warehouse properties clustered around I-35W and the Burleson Commons area. These gates cycle far more often than a residential driveway gate, sometimes two hundred times a day, and they cannot sit out of service for a week. We prioritize commercial calls for same-day or next-morning service.

The most common commercial failure we respond to in Burleson is a slide gate that has jumped its track or bound up on the roller wheels. This is usually caused by debris buildup in the bottom track, worn axles, or a vehicle strike that bent a guide roller. We also see loop detector failures where delivery trucks idle directly over the exit loop and the detector burns out. Commercial gate repair pricing in Burleson typically starts at $240 for control board and limit switch work, $380 – $850 for slide gate track and roller service, and $1,200 – $3,200 for full commercial slide operator replacement depending on gate length and duty cycle.

Slide Gate Track and Roller Service

When a commercial slide gate starts jerking or throwing a fault code, the usual culprits are the roller trucks, the bottom track, or the drive chain tension. We disassemble the roller assemblies, replace worn wheels and axles, clean the track, and verify the chain sag is within spec. A properly tuned slide gate coasts to its limit switches without strain.

Loop Detector and Safety Edge Replacement

Commercial gates in Burleson are required to have functioning entrapment protection, and a grounded or dead loop detector will stop a gate dead in its mid-travel. We test the loop continuity, replace the detector module if needed, and if the loop wire is broken underground, we saw-cut and install a new one. This work runs $280 – $620 and we can usually complete it in one visit.

Trusted Brands We Service in Burleson

We service and repair gate operators from LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. The two we see most in Burleson specifically are Ghost Controls, popular on the newer ornamental aluminum gates in the master-planned communities, and Linear, common on estate properties with heavier slide and swing gates. Because we carry control boards, limit switches, remotes, and safety-edge parts for these brands on our trucks, most Burleson repair visits are completed in a single trip. We do not ask you to wait a week for a part to ship in from somewhere else.

Common Gate Repair Problems We See in Burleson Homes

• Builder-grade plastic gears stripping in summer heat. The opener that came with the house was sized for a lighter ornamental gate, not the heavier gate or the longer heat exposure. When the plastic drive gear strips, the motor runs but the gate does not move. The fix is a metal-geared or linear actuator operator rated for the actual gate weight.
• Missing conduit for safety photocells and loop detectors. Many Burleson homes built since 2000 skipped the underground conduit across the driveway, which means the safety edge or photocell was never wired correctly. We retrofit the wiring, install new conduit, and bring the system up to current safety standards.
• Sagged hinge posts on older rural pipe gates. These gates carried horses and tractors for decades before the subdivision grew up around them. The hinge post settles, the gate drops, and the opener, if there is one, grinds against the stop. Welding and post reset are the only real fix.
• Storm and lightning damage to control boards. Burleson’s spring thunderstorms put the control board at risk when systems lack a proper surge suppressor. After a storm, a gate that was working is suddenly dead. We check the board, transformer, and any low-voltage wiring that lightning might have taken out.

Pricing for Gate Repair in Burleson, TX

We Also Serve Cities Near Burleson

Beyond our Burleson coverage, our Gate Repair in Burleson team runs regularly into Crowley, Mansfield, Fort Worth, and Haltom City. If your property sits close to a city line or you manage gates at more than one location, we can schedule multiple stops on the same dispatch. Call (817) 840-7067 and tell us where you are. We will tell you when a tech can be there.

FAQs About Gate Repair in Burleson