Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Motor Repair for Fort Worth Homeowners
A gate motor that grinds, hums without moving, or stops responding leaves your driveway half-open and your property exposed. Carver Gate Repair Fort Worth fixes gate motors across the city same-day, with technicians trained on Ghost Controls, DoorKing, and Elite systems. Lonnie Burke and his crew have worked on gate operators throughout Tarrant County since 2008, and every repair carries a written guarantee good for a full year. We answer the phone live, 24/7, and we hand you a written price before any work begins. If your gate won’t open or won’t close, call (817) 840-7067 now. Same-day service is available in most Fort Worth neighborhoods, and the diagnostic visit comes with a free estimate.
Gate Motor
A Gate Motor is the electric drive unit bolted to your gate post that swings or slides the gate open and closed, and when it fails you either can’t get in or can’t keep anyone out. In Fort Worth, we replace or rebuild gate motors on residential driveway gates weekly, from swing-arm operators to slide-gate motors with chain drives. A typical gate motor replacement in Fort Worth runs $650 to $1,400 depending on the motor’s size, duty cycle, and brand, and we carry parts for DoorKing and Mighty Mule units on our trucks. The motor itself is only part of the job: the limit switch, the capacitor, and the gearbox all have to be checked at the same time, otherwise the new motor fails for the same reason the old one did.
When the Motor Is Worth Rebuilding
If the motor still runs but the gate moves slow, hesitation at start-up usually points to a tired capacitor or worn gear, and that’s often a $180 to $340 repair instead of a full replacement. We bench-test the capacitor, open the gearbox, and check current draw before recommending anything. A rebuilt motor with fresh gears and a new capacitor can run another five to seven years on a residential gate.
Full Motor Replacement
When the motor windings are burned, the gearbox is stripped, or the unit is over 15 years old, replacement is the honest call. We quote the motor, the mounting hardware, and the labor as one written price, and we haul the old unit away. The new motor gets set limits, balanced force settings, and a full cycle test before we leave.
Styles & brands we work with
Gate Remote Control
A Gate Remote Control is the handheld or visor-clip transmitter that signals your gate motor to open and close, and if you’re standing in the driveway clicking a button with no response, the remote, the receiver, or the frequency match has failed. In Fort Worth, dead remotes are one of our most common calls and also one of the fastest fixes. A replacement remote and reprogramming on most residential systems runs $60 to $140 per remote, and we stock multi-brand units that work with DoorKing, Ghost Controls, and Mighty Mule receivers. If you lost every remote, we can clear the receiver’s memory and pair fresh units from scratch so no lost remote can open your gate.
Replacing and Pairing Remotes
We test the old remote’s battery and signal first, because a dead coin cell in the remote costs $12 to replace and saves you the cost of a new unit. If the remote is genuinely dead, we match the frequency and code format to your receiver and pair the replacement on-site. Every remote is tested from 50 feet away before we call the job done.
Receiver and Range Problems
If a new remote works but only from 10 feet away, the receiver antenna or its mounting location is usually the culprit. We relocate or replace the receiver, check for interference from nearby LED lights or wireless cameras, and restore clean range. You shouldn’t have to pull up to the gate and roll your window down.
Gate Keypad
A Gate Keypad is the weatherproof numeric pad mounted at the driveway that opens the gate with a four-digit code instead of a remote, and when it fails the gate either ignores the code or works only intermittently in the rain. Fort Worth’s heat and summer storms beat on gate keypads hard, and we replace cracked or corroded pads regularly. A new keypad installed and programmed on a residential gate in Fort Worth typically runs $110 to $210 depending on the brand and whether it wires directly to the motor or talks to a wireless receiver. We program master codes, user codes, and temporary visitor codes before we leave.
Weather Damage and Corroded Contacts
A keypad that works when it’s dry and dies after a storm has water inside the housing, and by then the membrane contacts are usually gone. We replace the keypad with a sealed outdoor-rated unit and coat the terminal connections to stop the same failure next year. The old code is deleted from memory so it can’t be used after the swap.
Programming and Code Management
When you’ve had turnover or a contractor with an old code, we clear all codes and rebuild the list from scratch. We set a master code only you hold, plus separate user codes you can delete anytime. Every code is tested at the keypad before we roll up the extension cord.
Gate Closer Spring
A Gate Closer Spring is the heavy coiled spring that pulls a swing gate closed after someone walks through it, and when that spring snaps the gate hangs open or drifts into the hinges. In Fort Worth, broken closer springs show up on both manual gates and backup gates beside motorized ones. Replacing a gate closer spring on a typical residential Fort Worth gate runs $120 to $280 including the spring, hardware, and labor, and we carry a range of spring tensions on the truck to match the gate’s weight. We never band-aid a snapped spring with a shorter or lighter replacement, because the wrong tension lets the gate slam and eventually cracks the hinge welds.
Spring Tension and Gate Weight
A replacement spring has to match the gate’s length, weight, and hinge offset, not just fit in the old bracket. We measure the gate and set the spring under controlled tension so the gate closes at a controlled speed without slamming. A correct spring saves the hinges from years of accumulated damage.
Signs the Spring Is Failing
If the gate closes but bounces back at the latch, or you hear a loud creak every time it moves, the spring is losing tension and needs attention before it snaps. We inspect the mounting brackets and the gate’s hinge points in the same visit, because a sagging hinge puts the new spring back under the same strain. This is a 30 to 60 minute job when caught early.
Gate Operator Keypad
A Gate Operator Keypad is the control panel mounted on or near the gate operator itself, used by technicians and homeowners to set limits, adjust force, and program the system, and when its display goes blank or buttons stop responding the whole operator goes unresponsive. On many Fort Worth gates, the operator keypad is the first thing to fail because it sits outdoors in direct sun. Replacing or repairing a gate operator keypad on a residential system in Fort Worth runs $130 to $300 depending on the operator brand and whether the keypad is a plug-in module or a hard-wired panel. We carry replacement keypads for DoorKing, Elite, and older Linear operator boards.
Dead Displays and Unresponsive Panels
A keypad with no display but a live motor usually means a failed control board or a blown surface fuse, and that’s a straightforward diagnostic on the bench. We test voltage at the board, check the fuse and the transformer, and replace the failed component with the right part number, not a jumper wire. A dead keypad is not an excuse to replace the entire operator unless the board damage runs deeper.
Reprogramming After Keypad Replacement
After the keypad is replaced, the limits, force, and delay settings all have to be re-entered and tested. We rebuild the programming from the operator’s manual, run the gate through at least five full open-close cycles, and verify the safety reverse stays functional. You get the settings written down in case you ever need them.
Gate Operator Repair
Gate Operator Repair is the full mechanical and electrical service work on the gate’s drive unit, covering everything from a failed limit switch to a stripped drive gear to a dead control board. In Fort Worth, we repair gate operators on swing gates, slide gates, and cantilever gates, for homeowners and for small HOAs. Most residential gate operator repairs in Fort Worth run $180 to $520 depending on the part and the labor involved, and we always quote a firm written price before starting. We keep common repair parts on the truck: limit switches, capacitors, control boards, photo-eye safeties, and receiver modules.
Common Failures We Fix
The limit switch that tells the operator where to stop travels wears out or fills with dust, and the gate overruns and crashes into the post. The loop detector that catches vehicles at the exit lane stops seeing metal, so the gate won’t auto-open. The articulating arm on a swing operator loses its pivot, and the gate jerks instead of sweeping. None of these require a brand-new operator when caught early.
When Repair Beats Replacement
If the operator is under 12 years old and the motor windings test clean, repair is usually the right call, and it’s cheaper than replacement. We repair operators from DoorKing, Mighty Mule, Ghost Controls, and Elite, matching replacement parts to the exact model instead of retrofitting whatever fits. You get the same written one-year guarantee on a repair as you do on a full replacement.
Brands We Service
Our Fort Worth technicians carry replacement parts and programming tools for the brands installed across North Texas, and we bench-test every unit we service. DoorKing operators are common on the larger slide gates in Mansfield and Burleson, and we stock their limit switches, loop detector boards, and keypads. Mighty Mule remains a popular DIY-installed brand, which means we regularly repair installations where the wiring, ground, or force settings were never done correctly from day one.
Ghost Controls and Elite both build solid residential operators, and each brand has its own programming menu and its own failure patterns worth knowing before you start swapping parts. Whether your operator is a DoorKing slide motor, an Elite swing arm, a Ghost Controls unit, or any other make, our diagnostic process is the same: test the motor, check the board, and quote a written repair price before any parts go in.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Gate moves but won’t fully open or close. The limit switch is failing or out of adjustment, and the operator is driving the gate past its stop point every cycle. This overrun bends brackets, cracks welds, and turns a $150 switch replacement into a much larger repair.
- Motor hums but the gate doesn’t move. The capacitor is dead or the drive gear has stripped, and the motor is cooking itself every time you press the button. Continued attempts will finish off the windings and force a full motor replacement.
- Gate reverses after hitting the ground or post. The force setting, the close limit, or the safety edge has failed, and the operator thinks it struck something every time. This is a cheap fix when caught early and an expensive one after the gate has crashed enough times to damage the operator housing.
- Remote and keypad work only at close range. The receiver antenna, the receiver module, or interference from a nearby wireless device has degraded the signal. The problem gets worse over time until you’re opening the gate manually, and the fix is usually under $150.
- Gate creaks, jerks, or bounces at the latch. The closer spring, the hinges, or the articulating arm are wearing and adding load to the motor with every cycle. A motor replaced without fixing the mechanical drag will fail again inside two years.
Our Process, Step by Step
- 1
Call and talk to a live person. When you call (817) 840-7067, a real person answers, day or night, and schedules your visit. You get an arrival window that matters, and we show up within it.
- 2
Diagnostic inspection at your gate. We test the motor’s current draw, check the capacitor, inspect the limit switches, the safety eyes, and the loop detector, and bench-test the control board if needed. The diagnostic is thorough enough that we find the root cause, not just the symptom.
- 3
Written price before any work. You get a written price for the repair, parts and labor both, before we turn a wrench. That number doesn’t change when the job is open, and you’re never billed for work you didn’t approve.
- 4
Repair with the right parts. We replace failed components with OEM or matched aftermarket parts for your brand, set limits and force, and test every function. The site is left clean, and the old parts are hauled away unless you want them.
- 5
Guarantee in writing and a test walk. Every repair carries a written 365-day guarantee. We cycle the gate five times minimum with you watching, hand you the paperwork, and make sure the remote, keypad, and safety reverse all work before we leave.
How Much Does Gate Motor Repair Cost in Fort Worth?
What drives the price is the part that failed, the brand of operator, and how much of the mechanical system needs attention alongside the electrical fix. A limit switch replacement is quick and cheap, while a burned motor winding means a full replacement. You avoid overpaying by getting a written diagnosis with the failed part identified and the labor spelled out separately. Our free estimate includes the diagnostic, the part identification, and the written price, all before any work is approved. That’s the guarantee under The Garrison Standard, and it applies to every gate we repair in Fort Worth.
Our Service Area Near Fort Worth
From our Fort Worth base we cover most of Tarrant County with same-day or next-day service, including Burleson, Mansfield, Benbrook, Crowley, Azle, River Oaks, Sansom Park, Haltom City, and Lake Worth. Response time inside the Fort Worth loop is typically two to four hours for emergency calls. If you’re in the Mid-Cities, see our Gate Motor Repair in Bedford page, and homeowners closer to the airport should check Gate Motor Repair in Southlake. Every service call in these areas carries the same written price and same full-year guarantee.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and offer Fort Worth Gate Motor Repair, so we know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Gate Motor Repair in Fort Worth
What is gate motor repair?
Gate motor repair is the service work that restores a failing gate operator: replacing capacitors, limit switches, control boards, gears, and motors, and reprogramming the unit to run safely. It covers the mechanical drive, the electronics, and the safety systems on the gate. If the gate is having trouble opening or closing, gate motor repair is what gets it back to daily use.
How long does a gate motor repair take?
Most gate motor repairs in Fort Worth are completed within one to two hours on site. Full motor replacements can run three to four hours including setup, mounting, and testing. We give you a time estimate with your written price so there’s no guesswork.
How much does gate motor repair cost in Fort Worth?
Gate motor repairs in Fort Worth typically run $180 to $520, while complete motor replacements run $650 to $1,400. Remote and keypad replacements run $60 to $210 depending on the part. You’ll get a free written estimate before any work starts, so the number never moves at your door. Call (817) 840-7067 for an exact quote on your gate.
Do you service DoorKing gate operators?
Yes, we service DoorKing gate operators across Fort Worth, including slide-gate motors, swing operators, loop detectors, and keypads. Our technicians are trained on DoorKing programming and carry replacement parts for the most common DoorKing models. If your DoorKing operator is failing, call us for a diagnostic and a written repair price.
Can you come out the same day for an emergency gate repair?
Yes, we offer same-day and 24/7 emergency gate repair in Fort Worth and most surrounding cities. When your gate is stuck open, your property is exposed, and we move emergency calls to the front of the schedule. Call (817) 840-7067 and a live person will dispatch a technician.
Is the repair covered by a warranty?
Every gate motor repair from Carver Gate Repair Fort Worth includes a written 365-day guarantee. If the repair fails within one year, we return and fix it at no charge, no argument. All guarantee terms are written down on your invoice.
How do I prepare for a gate motor repair visit?
Clear enough space around the gate operator for a technician to work, and have the key or code needed to access the motor housing ready. If your gate is stuck open, leave it open and call us right away. You don’t need to remove anything or diagnose the problem yourself; we handle the full inspection.
Schedule Your Gate Motor Repair Service in Fort Worth Today
If your gate won’t open, won’t close, or is making noise it never made before, call (817) 840-7067 now. You’ll talk to a live person who can dispatch a technician today. Every visit includes a free diagnostic and a written price before any work begins, and every repair from Lonnie Burke and the Carver Gate Repair Fort Worth team is guaranteed in writing for a full year.
Written by Lonnie Burke, Owner at Carver Gate Repair Fort Worth, serving Fort Worth since 2008.