Gate Repair Near Me in Fort Worth - Same-Day Repair, Priced Before We Start

Wrought iron

Wood & steel frame

Farm & ranch

Sliding driveway gates

LiftMaster operators

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Explore

Styles & brands we work with

01Wrought iron02Wood & steel frame03Farm & ranch04Sliding driveway gates05LiftMaster operators

Before & after

See the difference

Recent ProjectFull RestorationComplete Upgrade

BeforeAfter

BeforeAfter

BeforeAfter

Gate Repair Near You in Fort Worth, TX

If you’re searching “gate repair near me” in Fort Worth, you need a technician who can get to your property fast, quote a written price, and fix the gate the first time. Carver Gate Repair Fort Worth serves the entire Fort Worth metro with same-day and next-day service in most cases. Call (817) 840-7067 and you’ll reach a live person, not a voicemail box, any hour of the day or night.

We work exclusively on gates and gate motors. That’s the whole job. Our technicians arrive in uniform, they carry written price sheets, and every repair is backed by a 365-day guarantee in writing. If it fails inside that year, the second visit is free.

Fast, Local Gate Repair When You Need It

Here’s how a typical call works. You dial (817) 840-7067. A live person answers, takes your address and a description of what’s happening with the gate, and schedules a technician. In most Fort Worth neighborhoods, we can have someone on-site the same day or the next morning. Tarrant County traffic doesn’t slow us down much, because our techs run routes across the metro daily rather than dispatching from a single shop on the far side of town.

Every job starts the same way: the technician inspects the gate, the track, the hinges, and the motor if there is one, then hands you a written price before any work begins. That number doesn’t move at the door. You’ll know the cost of parts and labor up front, and you’ll get the same line-item breakdown the technician uses. The Garrison Standard is the operating code for every Carver location, and it means this process is not optional.

Most common repairs, such as a sagging gate, a failed limit switch, or a stripped gear in a swing operator, take under two hours on-site. A full motor replacement can take three to four hours depending on the system and the gate’s size. You’ll get a straight answer on timing before we start.

We carry parts for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems on our trucks. Nine brands. That matters because a technician who doesn’t stock your brand’s limit switch or control board is going to leave and come back, or worse, improvise with a part that doesn’t fit the system. We don’t do that.

Areas We Cover

Our technicians work across the full Fort Worth metro. That includes neighborhoods inside the loop like Ridglea, Wedgwood, and Arlington Heights, and stretches north to Saginaw and Keller, east to Arlington and Grand Prairie, west to White Settlement and Aledo, and south to Crowley and Burleson.

Nearby cities we serve: Gate Repair in Fort Worth, Southlake, Bedford, Burleson, Mansfield, Benbrook, Crowley, and Azle. If you’re on the edge of the service area, call anyway. Our dispatchers will tell you straight away whether we can get a truck to you today or tomorrow. The home page has more about how we work and what to expect on a service call.

Why Fort Worth Homeowners Call Carver Gate Repair

Fort Worth is a gate town. Large lots in Westworth Village, gated entries in Montserrat and Bella Flora, ranch-style properties down toward Alvarado, commercial gates on the industrial side of Haltom City. Iron and steel take a beating in this climate, and our crews see the same patterns repeat year after year. Clay soil shifts with every drought and wet season, pulling gate posts out of plumb. Extreme heat ages capacitor and circuit boards faster than the manufacturer’s timeline would suggest. Weld & rust issues and hinges that sag under the weight of heavy iron gates are common. Fort Worth’s afternoon thunderstorms put extra strain on photo eyes and loop detectors when water pools near the track.

A gate that won’t close is not a project to put off-call us for lock repair or any gate issue. It’s the difference between a secured property and an open invitation. We treat it that way. Our team works to The Garrison Standard on every job. That means written prices before work starts, background-checked and uniformed technicians, and a written guarantee on every repair, good for a full year from the date of service. If the repair fails inside that year, the second visit is free. No argument, no invoice.

Part of the Garrison Partners family, Carver Gate Repair has been operating to The Garrison Standard since 2008. The Fort Worth team is led by Lonnie Burke, a gate specialist who has worked on thousands of gates across Tarrant County and knows the systems installed in this market. When you call, you’re calling a crew that does gates only. Not fences, not garage doors, not a handyman service that “can probably take a look.” Gates and gate motors, every day.

Common Gate Problems We Repair in Fort Worth

Here’s what we see most often on service calls across the Fort Worth area, and what it generally takes to fix it.

• Sagging or dragging gate: Hinges wear out, posts shift in the clay soil, and the gate starts scraping the ground or the post. On a steel or iron gate, this usually means replacing hinge hardware and resetting post alignment.
• Gate won’t open or close fully: A failed limit switch is the usual suspect. The limit switch tells the motor where the gate is in its travel. When it goes bad, the motor stops too early or too late.
• Motor runs but the gate doesn’t move: On chain-driven systems, a stripped gear or a snapped chain is common. On hydraulic operators, low fluid or a bad pump can be the cause.
• Gate reverses for no reason: Photo eyes or a loop detector sensing a false obstruction. Rain, dirt, or a misaligned sensor can all trigger this. Sometimes it’s a simple cleaning and alignment, sometimes the sensor needs replacing.
• Remote or keypad stopped working: If the gate works from the manual switch but not the remote, the receiver board may have failed, or the remote simply lost its programming. We test the signal on-site and reprogram or replace.
• Gate opens on its own or stays open: This is a priority call. A gate that opens unprompted is unsecured. We treat these as emergency calls and dispatch as fast as possible, including nights and weekends.

How Much Does Gate Repair Cost in Fort Worth?

The question we hear most after “how fast can you get here” is “what’s this going to cost.” Honest answer: it depends on the failure, but here’s a straight breakdown of what Fort Worth gate repair typically runs.

Those are Fort Worth market numbers based on what we quote and what we see from other local shops. Your gate’s size, material, and motor brand all move the final number. You’ll get a written price before any work starts, so there are no surprises when the job is done.

How a Gate Repair Service Call Works

This is the process on every Carver Gate Repair job in Fort Worth, start to finish.

1. Call (817) 840-7067. A live person answers, day or night, weekends and holidays included. You describe the problem, give us the address, and we schedule a window.
2. Technician arrives on time. Our techs are background-checked and uniformed. They’ll introduce themselves, ask about what you’ve been seeing with the gate, and start the inspection.
3. You get a written price. Before any work starts, you receive a line-item written price for the repair. That is The Garrison Standard. The number on the sheet is the number you pay.
4. The repair gets done. Most repairs are completed in one visit. Our trucks carry parts for all nine gate motor brands we service, so we’re not waiting on a parts run for the common failures.
5. We test the gate thoroughly. The technician will run the gate through multiple open and close cycles, check safety sensors, and confirm the motor’s limits are dialed in. You’ll see it working before we leave.
6. You get the guarantee in writing. Every repair carries a written 365-day guarantee. If it fails within the year, the second visit is free. Free service call, free labor, free parts. No argument.

Gate Motor Brands Our Fort Worth Technicians Service

We’re trained and stocked for the nine brands most common in the greater Fort Worth area.

• LiftMaster – the most common residential opener in the metro
• FAAC – hydraulics and swing operators on larger residential and commercial gates
• BFT – Italian operators found everywhere from single-family gates to apartment complexes
• Linear – swing and slide operators, especially popular in older Fort Worth neighborhoods
• Viking – heavy-duty commercial gate operators
• Ghost Controls – automatic gate openers popular for DIY-installed systems
• DoorKing – commercial and residential slide operators, common in gated communities
• Elite – slide gate operators seen on many ranches and acreage properties
• Mighty Mule – the most common DIY swing gate opener in the region

If your system’s brand is not on that list, call anyway. We’ll tell you over the phone whether we can service it, and if not, we’ll say so directly rather than coming out and experimenting at your expense.

FAQs

How fast can you get to my gate in Fort Worth?

In most cases, we can have a technician on-site the same day you call or the next morning at the latest. Our techs run routes across the entire Fort Worth metro daily. For a gate that won’t close or has opened on its own, we treat that as an emergency and dispatch as quickly as possible, including nights and weekends. Call (817) 840-7067 for a straight answer on today’s availability.

Do you serve my area of Fort Worth?

We cover the full Fort Worth metro, including Southlake, Bedford, Burleson, Mansfield, Benbrook, Crowley, and Azle, plus neighborhoods across the city itself. If you’re anywhere in Tarrant County or just beyond, call (817) 840-7067 and our dispatcher can confirm we’ll get to you today or tomorrow.

How much does gate repair cost in Fort Worth?

Gate repair in Fort Worth typically runs $90 to $320 for common fixes like hinge replacement, limit switch replacement, or sensor work. Motor replacement ranges $650 to $1,900 depending on the brand and gate type. You’ll receive a written price before any work starts, so the cost is locked in up front. Call (817) 840-7067 for an exact quote, and the estimate is free.

Can you fix my gate after hours or on weekends?

Yes. Our phones are answered by a live person 24 hours a day, 7 days a week, including weekends and holidays. If the gate is stuck open or the motor is making a loud grinding noise, we’ll dispatch as soon as possible. The call center is staffed around the clock, not by an answering service that takes a message and hopes someone checks it Monday.

Is it cheaper to repair or replace a gate motor?

For most gate motor issues, repair is cheaper than replacement. A limit switch or capacitor runs $120 to $260. A control board replacement runs $280 to $620. Full motor replacement starts around $650. We’ll give you a written price for the repair and tell you plainly if the motor is too far gone for repair to make sense. We’ll never push a replacement when a $150 part fixes the problem.

Call Carver Gate Repair Fort Worth

When your gate is down, you don’t need a call-back queue or a technician who might show up sometime Thursday. You need a straight answer and a fast fix. That’s what we do.

Call (817) 840-7067 now and you’ll reach a live person who can schedule a service call today or tomorrow. You’ll get a background-checked, uniformed technician, a written price before any work starts, and a 365-day written guarantee on the repair. If it fails within the year, the second visit is free.

Led by Lonnie Burke, the Fort Worth team works to The Garrison Standard on every job. No moving prices. No no-shows. No half-finished work. Just a gate that opens and closes like it should.

Written by Lonnie Burke, Owner at Carver Gate Repair Fort Worth, serving Fort Worth and nearby areas.