Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateWhy Fort Worth Homeowners Choose Mighty Mule Gate Repair
We provide independent Mighty Mule repair in Fort Worth, with technicians who work on MM371W, MM572W, and FM200 openers every week. The difference is simple: we know which parts fail after a Texas hailstorm versus a 100-degree afternoon, and we stock the components to fix them fast. We are not affiliated with or authorized by Mighty Mule. We’re an independent service provider with deep hands-on experience in their product line, and we’re one call away at (817) 840-7067.
Why Trust Carver Gate Repair Fort Worth for Your Mighty Mule Gate Repair?
Mighty Mule openers run on specific control logic, specific gear ratios, and specific board firmware. A technician who works on Gate Repair generally is not the same as one who knows the MM572W’s tendency to strip gearbox teeth when the gate gets pushed manually. Lonnie Burke, owner of Carver Gate Repair Fort Worth, grew up in the San Fernando Valley and learned metalwork and mechanical systems at Los Angeles Trade-Technical College before spending two decades turning that foundation into gate repair work. He and the crew have been working Fort Worth properties for years, from slide gates in the Rivercrest corridor to failed openers on commercial properties across the city. Lonnie’s habit is to diagnose the actual problem: bad limit switches, worn drive gears, gate sag from a settled post. Not guesswork. The result is a repair that fixes the failure the first time, backed by a written guarantee good for a full year.
We use genuine Mighty Mule parts where OEM compatibility matters. Control boards, swing arms, receiver modules: those should be Mighty Mule. Aftermarket chain, sealed bearings, solar panels: those we source where the originals wear out from normal exposure and a quality replacement is simply better engineering. Either way, the price is written down before any work starts, and it does not move at the door.
Styles & brands we work with
Common Mighty Mule Gate Repair Problems We Fix in Fort Worth
Every gate opener brand has its own failure fingerprint. Here are the Mighty Mule issues we see most often across Fort Worth, and why they happen here specifically.
- Control board failure on MM371W after lightning. Fort Worth spring storms bring close lightning strikes, and the MM371W’s control board is the first component to take the hit. The opener stops responding to remotes and the keypad, but the motor still tests fine. We replace the board with a genuine Mighty Mule unit and re-sync all remotes and keypads. Last week our tech responded to a home off Bryant Irvin Road where an MM572W had stopped opening after a storm. We found the control board burned at the relay, replaced it with a genuine Mighty Mule board, re-synced the homeowner’s two remotes and keypad, and the gate was running before noon.
- MM572W gearbox teeth stripping. When a gate gets pushed open manually instead of using the opener release, the MM572W’s gearbox takes the load in a direction it was not designed to handle. Teeth strip. You hear grinding, and the arm slips instead of driving. This is the single most common failure we see on the MM572W in Fort Worth, where heavy wrought-iron gates invite manual pushing. The fix is a new gearbox or a new opener head, depending on the extent of the damage.
- FM200 chain jumping off the sprocket. The FM200 is a slide gate opener, and slide gates live and die by their wheel bearings. Unsealed gravel driveways, common in Fort Worth’s newer subdivisions along Chisholm Trail Parkway, kick dust and grit into the bearing races. The bearings seize, the chain loses tension, and the gate stalls mid-travel. We replace the bearings, re-tension the chain, and the gate runs clean again.
- Mighty Mule battery backup failing after 18-24 months of heat. The MBS1000 battery backup is a sealed lead-acid unit. Fort Worth’s summer heat cooks lead-acid batteries. After 18 to 24 months, the battery won’t hold a charge. The gate beeps when the power goes out but won’t move. That’s a battery replacement, and it’s a quick one.
- Remote and keypad desync after battery changes. Mighty Mule remotes desync from the receiver when the remote battery dies or is replaced incorrectly. The keypad still works because it’s a separate code path, but the remote won’t. Re-pairing takes ten minutes, but the dip switch or learn-button sequence is model-specific, and doing it wrong can lock the receiver entirely. We handle it on the first attempt.
Mighty Mule Parts & Our Repair-vs-Replace Approach
We stock genuine Mighty Mule control boards, swing arms, remotes, and receiver modules on our trucks. We also carry high-quality aftermarket chain, sealed bearings, solar panels, and battery backups where the original part is a commodity that wears out from normal exposure. The distinction matters: an FM200 encoder alignment requires an OEM board, no argument. A worn chain on an MM371W does not. We use the right part for the job, not the one with the highest margin.
We repair before we recommend replacement. But when a gearbox is stripped or a control board is fried beyond component-level repair, we tell you straight: a new opener head costs less than repeated patch jobs. You get the written price for either path before the work begins. If you’re not sure whether to repair or replace, call us at (817) 840-7067 and we’ll walk through what your specific opener needs.
Our Mighty Mule Service Process – Step by Step
- 1
Diagnosis. We start by observing what the gate is doing wrong and when it started. We test the control board, motor, limit switches, and power supply individually. On Mighty Mule units, we check the encoder alignment on FM200 models and the gear engagement on swing arms before touching anything else. The written price comes after diagnosis, approved by you before work starts.
- 2
Repair or install. We use genuine Mighty Mule parts where OEM compatibility matters. The work is done on site, and we work around Fort Worth’s heat and freeze cycles with parts rated for exterior exposure. We don’t leave half-installed components or temporary fixes.
- 3
Testing. We cycle the gate 10 to 15 times minimum, including obstruction tests, auto-close timing, and remote/keypad sync. We verify the safety edges and photo eyes work. On FM200 slide gates, we check chain tension and wheel bearing play after the repair.
- 4
Warranty. Every Mighty Mule repair is backed by our 365-Day Done Right Promise. If the repair fails inside the guarantee period, we come back free, no charge, no argument. The guarantee is in writing.
See the difference
Before
After
Before
After
Before
AfterMighty Mule Products We Service & Install in Fort Worth
Our crew works on the full Mighty Mule residential lineup. We service and install MM371W single swing gate openers, the heavier MM572W single swing units, and FM200 sliding gate openers. We also handle the MMKIT371W single swing gate kit with battery backup, plus MBS1000 battery backups, Mighty Mule keypads, remote transmitters, and solar panel kits. Fort Worth’s freeze-thaw cycles and summer heat put real strain on gate hardware, so we keep the common failure parts on our trucks: control boards, swing arms, remotes, chain, bearings, and battery backups.
We Also Service These Brands
While this page covers Mighty Mule, our Fort Worth crew also works on LiftMaster, Ghost Controls, and DoorKing openers, and we offer Mighty Mule service in Southlake as well. If your property has a different brand, the same written pricing, background-checked technicians, and full-year guarantee apply.
FAQs – Mighty Mule Gate Repair Service in Fort Worth
No. We are an independent Mighty Mule service provider. We are not authorized by, affiliated with, or sponsored by Mighty Mule. What we bring is hands-on experience with their product line and a written guarantee on every repair. For many homeowners, that’s the combination that actually matters.
We use genuine Mighty Mule control boards, swing arms, remotes, and receiver modules where OEM compatibility matters. For wear items like chain, bearings, solar panels, and battery backups, we use high-quality aftermarket parts that match or exceed the original spec. We explain which part we’re using and why before the work starts.
Most single-issue repairs, like a control board replacement on an MM371W or a bearing replacement on an FM200, are done in a single visit lasting one to two hours. Gearbox replacements on the MM572W may take longer if the arm has to be disassembled. We give you a written time estimate along with the written price. Call (817) 840-7067 to schedule.
We service the MM371W single swing opener, MM572W heavy-duty single swing opener, FM200 sliding gate opener, and MMKIT371W kit with battery backup. We also work on Mighty Mule keypads, remotes, solar panels, and battery backups. If your model is older or discontinued, call us. We can often match parts or recommend a direct replacement.
If your Mighty Mule opener is still under manufacturer warranty, an independent repair does not automatically void it. However, using non-OEM parts on a warranty-covered component can affect coverage. We use genuine Mighty Mule parts on warrantied components to keep your coverage intact, and we tell you upfront if a repair might affect the manufacturer’s warranty.
Most Mighty Mule repairs in Fort Worth run from $65 for a simple remote re-pair to $185 to $245 for a control board replacement. Gearbox replacement on an MM572W typically runs $280 to $360. A new Mighty Mule opener head, if replacement is the honest call, starts around $450 to $600 installed. Every price is written down before work begins. Call (817) 840-7067 for an exact quote on your specific Mighty Mule model. Estimates are free.
That’s usually an obstruction detection issue, and on Mighty Mule openers it often comes down to a misaligned limit switch or a failing safety edge sensor. Fort Worth’s freeze-thaw cycles can shift gate posts just enough to trigger the reverse function. We diagnose the specific cause and fix it, not just reset the opener.
A lightning strike usually damages the control board, not the motor. On MM371W and MM572W models, the board is replaceable, and we install a genuine Mighty Mule board. Unless the motor itself took a surge, you likely won’t need a whole new opener.
The remote and keypad use separate code paths. When the remote battery dies or is replaced incorrectly, the remote loses sync with the receiver while the keypad keeps working. Re-pairing is model-specific and quick, but doing the sequence wrong can lock the receiver. We fix it in one visit.
The auto-close timer is set through the control board’s dip switches or potentiometer, depending on the model. It’s a simple adjustment, but setting it too short creates a safety hazard if the gate closes on a vehicle or person. We recommend having a professional make the adjustment so the safety edges and photo eyes are verified at the same time.
That’s almost always a dead battery backup. The MBS1000 sealed lead-acid battery wears out in 18 to 24 months under Fort Worth’s summer heat. The gate beeps to indicate it’s on battery power, but the battery doesn’t have enough charge to drive the motor. Replacement is straightforward.
Book Your Mighty Mule Service in Fort Worth, TX
One call covers it. We answer live 24/7, we give you a written price before the work starts, and every Mighty Mule repair carries our 365-Day Done Right Promise. Call (817) 840-7067 for a free estimate on your Mighty Mule gate repair in Fort Worth.
Written by Lonnie Burke, Owner at Carver Gate Repair Fort Worth, serving Fort Worth Mighty Mule owners with written pricing and a full-year guarantee.