Sliding driveway gates
Wrought iron
Wood & steel frame
Farm & ranch
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterDriveway Gate in Fort Worth, TX
A driveway gate installation in Fort Worth typically runs $4,200 to $11,800 depending on material, automation, and driveway width, and most single-gate jobs are completed within three to five business days once materials arrive. Carver Gate Repair Fort Worth handles the full scope: site measurement, gate fabrication or sourcing, operator mounting, safety sensor placement, and final programming. If you’re weighing whether a driveway gate is worth it for your property, call us at (817) 840-7067 and we’ll give you a straight answer before you spend a dime.
We’re the Gate Installation in Fort Worth crew that works to The Garrison Standard: written prices before work starts, background-checked technicians who show up in uniform, and a full-year guarantee in writing on every job. No vague estimates. No moving numbers at the door. Lonnie Burke runs the Fort Worth operation and holds every technician to the same bar on every single call.
Driveway gates do three jobs in this part of Texas. They keep solicitors and strangers off the property. They keep kids and dogs from wandering toward the street. And on larger lots in places like Benbrook, Aledo, or the acreage pockets west of Loop 820, a gate signals exactly where private property begins. The right gate does all of that without turning your daily commute into an aggravation.
Key Takeaways
- Cost range: $4,200 to $11,800 for most Fort Worth driveway gate installations, with automation adding $1,500 to $3,400 depending on operator type.
- Timeline: 3 to 5 business days for a typical single-swing or single-slide gate once materials are on site.
- Written guarantee: Every installation carries our 365-Day Done Right Promise in writing, covering a full year from the date of service.
- Safety matters: Driveway gates are heavy, motorized equipment. Sensor placement and force settings have to be right, which is why we send trained technicians, not generalist handymen.
When You Need Driveway Gate
Plenty of Fort Worth homeowners start thinking about a driveway gate after a specific moment. The door-to-door pitch that went too far. A dog that slipped out during a delivery. A teenager learning to drive and a driveway that opens straight onto a 40-mph county road. Here are the situations that usually push a driveway gate from “someday” to “call someone this week.”
- You live on a corner lot or busy cut-through street. Streets like those in the Ryan Place or Mistletoe Heights historic districts see more foot traffic than most people expect. A gate introduces a clear boundary without building a fence line you may not want.
- You have a long driveway that runs to an outbuilding or detached garage. Anything stored back there, from trailers to tools, is visible from the road. A gate at the property line changes what passes through to the back of your lot.
- Your driveway opens onto a road with no sidewalk buffer. In parts of northwest Fort Worth and unincorporated Tarrant County, driveways empty directly onto farm-to-market roads. A gate gives you a controlled stopping point for kids and pets.
- Multiple cars, one driveway, and delivery traffic. Package carriers, lawn crews, and contractors all need access. A keypad or remote system means you can let people in without walking out to the road every time.
- Your HOA or neighborhood standard calls for it. Several gated communities in the Fort Worth area, including sections of Riverhills and parts of the Mira Vista corridor, expect individual driveway gates to match community entry styling.
- You’re already replacing the fence line. The least expensive time to add a driveway gate is when posts are already going in and trenching is open. We coordinate directly with fence crews to avoid double work.
Our Driveway Gate Process
Our Gate Installation services cover more than hanging steel on hinges. The operator has to match the weight and duty cycle of the gate. The sensors have to account for vehicles of different heights. The posts have to be set deep enough to handle wind load and years of daily cycling. Here’s how we run the job.
- Site measurement and driveway assessment. We measure the opening, check the slope, look at prevailing wind, and confirm power availability. These four factors determine whether you need a swing gate, a slide gate, or a cantilever design, and which operator class the motor needs.
- Written proposal with a fixed price. You get the full breakdown before any work starts. Gate material, operator, keypad or remote package, sensor equipment, concrete work, labor. The number on that page is the number you pay.
- Post setting and gate mounting. We dig and set posts to the depth required for the gate’s weight and height. Wind load in North Texas is not a joke, and a post set shallow will lean within two seasons.
- Operator installation and safety sensors. This is where the trade knowledge matters. We train on Ghost Controls, DoorKing, Elite, and Mighty Mule systems, and we match the operator to the gate’s specific duty cycle. Photo-eye sensors are positioned for vehicle and pedestrian safety, not just code compliance.
- Programming, testing, and walkthrough. You test the gate with us standing there. We adjust closing speed, auto-close timing, and remote programming until the gate operates the way you want it to.
- Site clean-up and written guarantee. We haul off packing material and old equipment. You get your 365-Day Done Right Promise in writing: if the installation fails inside a year, we come back free and make it right.
Driveway Gate Pricing in Fort Worth
If you’re wondering How Much Does Gate Installation Cost? (2026 Price Guide) - Fort Worth, TX, driveway gate installation in Fort Worth runs from $4,200 for a basic single-swing steel gate with no automation to $11,800 or more for a custom ornamental gate with an advanced slide operator and keypad access. Most of our Fort Worth customers land between $5,500 and $8,900 for a mid-weight steel drive gate with an automated opener.
Here’s what actually drives the price:
- Gate material and style. Powder-coated steel costs less than forged ornamental iron. Aluminum weighs less but can run more on material cost per foot. Wood gates need steel frames to hold up long-term in North Texas heat and humidity swings.
- Swing vs. slide. A swing gate is usually the less expensive option when the driveway is flat and the setback allows it. A slide or cantilever gate costs more because it needs a longer track, longer gate panel, and typically a heavier-duty operator.
- Operator duty class. A lightweight operator built for 10 to 12 cycles a day costs less than a commercial-grade unit rated for 40-plus cycles. If multiple drivers use the gate daily, we’ll recommend the heavier unit. The price difference is worth it in motor life.
- Access control. A basic remote package keeps the cost down. Adding a keypad, a vehicle exit loop detector, or a phone-app system raises the total. We quote each option separately so you can decide what’s worth the money.
- Site preparation. Concrete work, demolition of an old gate or fence section, trenching to run power, and tree or brush clearing all add to the final figure. We show these as separate line items on the written proposal, not buried in a lump sum.
Every estimate we give in Fort Worth is free, and it’s delivered in writing before any work begins. Call (817) 840-7067 to schedule a site measurement and get the actual number for your driveway.
FAQs – Driveway Gate
How much does a driveway gate cost in Fort Worth?
A driveway gate in Fort Worth costs $4,200 to $11,800 installed, with most automated residential gates landing between $5,500 and $8,900 depending on materials, operator type, and site conditions. The price you pay should be in writing before work starts, and ours always is. Call (817) 840-7067 for a free site measurement and an exact quote for your driveway.
Is it cheaper to repair or replace a driveway gate?
When the gate panel and posts are structurally sound, repairing the operator or swapping a limit switch is almost always the less expensive route, typically $250 to $850. If the posts are leaning, the panel is rusted through, or the operator has failed twice in a year, replacement usually wins over repeated repair spending. Lonnie Burke and the Fort Worth crew will tell you which way to go without pushing you toward the more expensive option.
Can you install a driveway gate on a sloped driveway?
Yes. Sloped driveways in Fort Worth are common, particularly in neighborhoods like Monticello and along the Trinity River bluffs, and they usually call for a slide gate or a swing gate with hinge offset and a heavier-duty operator rather than a standard swing setup. The key is measuring the slope precisely and selecting an operator rated for the gate’s weight and travel. We handle this during the site assessment at no charge.
How long does a driveway gate installation take?
Most driveway gate installations in Fort Worth take three to five business days once materials arrive on site, with custom-built ornamental gates adding a week or two for fabrication. We schedule the work in a clear window and show up when we say we will. Every installation is backed by our 365-Day Done Right Promise, so if anything fails inside the guarantee year, the second visit is free.
Do you work on Ghost Controls, DoorKing, and Mighty Mule driveway gate operators?
Yes. Our technicians are trained on Ghost Controls, DoorKing, Elite, and Mighty Mule driveway gate systems, plus five more operator brands, which means we match the right parts and programming to the motor you already have rather than pushing a one-size-fits-all replacement. If you’re replacing an old operator or building a new driveway gate from scratch, we spec the brand that fits your gate’s weight, duty cycle, and access needs, including a Pedestrian Gate if your property needs one.
Call Carver Gate Repair Fort Worth
If you’re ready to price out a driveway gate, start with a phone call. You’ll reach a live person at (817) 840-7067, any hour of the day, any day of the year. We’ll schedule a site measurement, quote you a written price before any work begins, and install the gate to The Garrison Standard. No surprises at the door. No numbers that move. A background-checked technician in uniform, a clean site when we leave, and a full-year written guarantee on the work.
Written by Lonnie Burke, Owner at Carver Gate Repair Fort Worth, serving Fort Worth.