Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Motor Repair Across Burleson
Gate motor repair in Burleson typically runs $180 to $520 depending on whether the issue is a limit switch, circuit board, or full operator replacement. Most calls we take from Burleson are answered same day, with a technician dispatched from our Dallas-Fort Worth office directly to your driveway. Burleson’s mix of new subdivision gates and older ranch-style pipe gates means we see every failure mode you can imagine, from warped gears on two-year-old operators to burned out rack-and-pinion drives on gates built for tractors. Call (817) 840-7067 and you’ll speak to a live person, not a routing tree. We give you a written price before any work starts, so the number on the invoice matches the number you approved.
Why Carver Gate Repair Fort Worth Is Burleson’s Preferred Gate Motor Repair Company
The Gate Motor Repair in Burleson work we do sits inside a specific set of rules called The Garrison Standard, in place since 2008. Every technician who rolls up to a Burleson home is background-checked and uniformed. Every repair carries a written guarantee in your hand. Every job starts with a written price, not a handshake. Homeowners here have told us they’re done with no-shows and moving prices, so we built the process around eliminating both.
Our techs know Burleson’s housing stock without needing a map lesson. The neighborhood tells us what we’re walking into: a home in the newer Hidden Creek or Highland Park sections likely has a builder-grade opener on ornamental iron, while a property off CR 528 or in the older sections near downtown may have a welded pipe gate that’s been there since before the subdivision existed. That changes the parts we bring and the questions we ask before we diagnose. Lonnie Burke runs our operation with one standing rule: we treat every gate like it’s attached to the house where we’re standing, not the house after it.
Styles & brands we work with
Gate Operator Keypad in Burleson
Gate operator keypad service in Burleson often means replacing a wireless keypad that’s gone dead after rain, reprogramming a keypad after a battery swap, or swapping a worn numeric pad for one that’s rated for direct Texas sun exposure. Burleson homeowners call us when the gate opens fine with a remote but won’t budge when they punch a code into the keypad. Sometimes it’s a simple programming issue. Sometimes the keypad’s membrane has degraded from UV, and water has crept into the board.
Common Burleson Keypad Failures
A keypad that works intermittently in Burleson is usually fighting one of two things. The first is corrosion on the wire terminals behind the pad. The second is a wireless keypad that lost its code to the receiver. The fix takes most techs under an hour, and a typical keypad replacement in Burleson runs $140 to $260 including the part. If the keypad still works but needs a code change after a tenant leaves or a contractor finished a project, that’s a quick programming call, usually $75 to $120.
Keypad Weatherproofing in Burleson
The sun on Burleson’s south-facing gate posts in August will cook an off-the-shelf keypad from a retail store in a season or two. We stock weather-sealed keypads from brands that hold up to 110-degree afternoons and severe thunderstorm downpours. If you’re in a low-lying yard near Village Creek, flooding isn’t the only concern. A keypad that fills with water after a heavy spring rain needs more than a seal replacement. The mounting angle and drainage need to be corrected, or the same failure returns in six months.
Gate Operator Repair in Burleson
Gate operator repair in Burleson means figuring out whether the motor, the control board, the sensor loop, or the gate itself is the problem, then fixing only what failed. A gate that stops halfway across its arc is one thing; a gate that runs but won’t close without reversing is something else. The right diagnosis matters because replacing a $300 board when the problem is a $15 limit switch is a mistake a homeowner should never pay for.
Operator Diagnostics on Burleson Driveway Gates
Our Gate Motor Repair process starts with the basics: power to the unit, condition of the drive mechanism, alignment of the safety sensors, and whether the operator is sized correctly for the gate’s weight and length. In Burleson, we often find problems that had nothing to do with the motor. Hinge posts settle in the North Texas clay soil, and once a gate sags a half inch, the operator works against gravity on every cycle. That extra load burns out motors and boards years before they should have failed.
Reliability Repairs, Not Band-Aid Fixes
When we replace a part in a Burleson gate operator, we want that part to outlast the one that came out of the box. That means a metal drive gear instead of plastic, a loop detector that’s sealed against moisture, and limit switches that get set, or re-set, to the specific travel of the gate they’re operating. A one-year written guarantee covers every repair we make, and if it fails inside that year, the second visit is free. That isn’t a promotion. That’s The Garrison Standard.
Trusted Brands We Service in Burleson
We keep parts in stock for Ghost Controls, DoorKing, Elite, and Mighty Mule systems, along with LiftMaster, FAAC, BFT, Linear, and Viking. A Burleson customer with a Ghost Controls solar opener on the back of a large lot gets the same turnaround as someone with a DoorKing slide operator on a gated driveway. We stock the specific circuit boards, limit switches, remotes, and keypads those systems need because ordering parts for a week out means you lose another week of a secure driveway. When we finish, the gate opens and closes on the first command, not the third.
Common Gate Motor Repair Problems We See in Burleson Homes
- Builder-grade operators with undersized conduits. New subdivision gates in Burleson often get a low-end opener installed with conduit that’s too small for the wire the system actually needs. When a board fails and we can’t pull new wire through the undersized conduit, we have to run an external run, which must be buried correctly to meet code.
- Ranch pipe gates retrofitted with big-box slide motors. Heavy pipe gates built for livestock or wide equipment get paired with residential slide operators that can’t handle the weight. The rack and pinion wears out fast, and the motor burns up. These gates need a heavier-duty opener sized to the actual gate weight.
- Loop detector failures after spring storms. Low-lying yards in Burleson collect water in the sawcut where the loop wire sits. When water sits in that channel, the loop shorts out, and the gate doesn’t know a car is there. The gate either won’t open or won’t close, depending on how the system fails.
- Limit switches knocked out of calibration by settled posts. North Texas clay soil moves. When a hinge post settles even a quarter inch, the gate’s travel point shifts, and the limit switch trips at the wrong stage of the cycle. The gate stops halfway, or slams into the stop, and the operator absorbs the force until a gear breaks.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Motor Repair in Burleson, TX
A service call in Burleson runs $75 to $110, which covers the trip and the on-site diagnosis. Typical repairs fall into predictable ranges: a limit switch replacement runs $150 to $250. A keypad replacement is $140 to $260. A loop detector replacement runs $220 to $380, depending on whether we need to re-cut the sawcut and re-seal it. A control board replacement starts around $250 and can go to $600 for higher-end swing operators. A full operator replacement, motor and all, runs $650 to $1,400 on standard residential gates, and more for heavy pipe gates that need a commercial or heavy-duty opener. Every price is written down and agreed upon before we open a panel or turn a wrench. Call (817) 840-7067 for a free, exact quote, and you’ll know what the repair costs before we ever load parts onto the truck.
We Also Serve Cities Near Burleson
Our Burleson customers call us from all around southern Tarrant County and northern Johnson County. We serve Burleson directly, along with Crowley, Mansfield, Fort Worth, and Haltom City. If you’re a few minutes outside of city limits, call us at (817) 840-7067 and we’ll confirm we can get to you.
Serving Burleson, TX - Our Local Coverage Area
We’re based in the Burleson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Motor Repair in Burleson
Builder-installed gate openers in Burleson stop halfway because the original installation often used the cheapest operator the builder spec sheet allowed, paired with conduit that was undersized for the gate’s actual power draw. The gate’s posts may also have settled in the North Texas clay, knocking the limit switch out of calibration. The fix is usually a combination of re-setting the limit switch to the gate’s current travel, correcting any sag, and sometimes replacing a plastic gear that warped from the heat. Call (817) 840-7067 and we can diagnose the specific reason your gate is stopping.
Yes, and this is one of the most common calls we get in Burleson’s older sections. The key is matching the operator to the gate’s true weight, not the weight a homeowner estimates. A welded pipe gate built for horses or tractors can weigh several hundred pounds, and a standard residential slide motor from a hardware store will burn out in months. We spec a heavier-duty opener, install it with the rack and pinion rated for that gate’s weight, and make sure the post footings can handle the torque. A typical Gate Installation - Burleson automation retrofit on a heavy ranch gate runs $900 to $1,800 including the operator, depending on whether power already reaches the gate.
Heavy rain in Burleson lets water into keypads that were never sealed well or mounted with enough drainage, and it shorts the wiring behind the pad. The quick fix is drying and cleaning the internals; the permanent fix is replacing the keypad with a weather-sealed model and adjusting the mounting so water sheds away from the component. We see this most often in low-lying yards near Village Creek and in neighborhoods where the gate post sits at the bottom of a slope.
A photocell that reverses the gate for no apparent reason in Burleson usually has one of three problems: direct sunlight flooding the receiver lens, a misaligned sensor pair, or spider webs and dust accumulating inside the lens and diffusing the beam. In newer Burleson neighborhoods with south-facing gates, solar saturation in the afternoon is a consistent issue. We clean the lenses, re-set the alignment so the beam holds, and install hoods where the angle allows. If the photocell itself is failing internally, replacement runs $120 to $200.
Solar-powered gates in Burleson need an operator that draws low amps and gets a full day of charge from the panel, plus a battery bank sized for overcast stretches and the heat that degrades battery capacity. If you currently have a standard AC operator wired to a solar system, that’s likely the source of the failure. We install and service Ghost Controls and Mighty Mule solar systems regularly, and a solar gate motor replacement in Burleson typically runs $600 to $1,200 installed. Call (817) 840-7067 and we’ll confirm the panel and battery are right for the opener you have.
One More Thing: Burleson’s Dual Reality
Burleson grew fast. Ranch land that sat flat and open for decades became master-planned communities in the span of a few years, and that conversion left a specific set of gate problems behind. On one side of the city, you have new homes with builder-grade operators installed on ornamental iron gates. Those systems look fine on move-in day, but the undersized conduits, plastic gears, and lowest-bid installs start showing up as service calls after two or three summers. On the other side of Burleson, you have older ranch properties where the gate was built for livestock, not a Honda. New homeowners don’t always know their pipe gate weighs three times what a subdivision gate weighs, and the slide opener they bought online can’t handle the rack load. Both sides need the same thing: someone who knows what they’re looking at before they sell you a part. In the Hidden Creek development, we were called to a two-year-old LiftMaster operator on a builder-grade ornamental iron swing gate that would stop mid-cycle. The gate motor repair revealed a plastic drive gear warped from direct south exposure and a hinge post that had settled, throwing off the limit switch. We replaced the gear with a metal gear, corrected the hinge post footing with a steel shim, and added a sag correction bracket. The gate has operated smoothly through two summers since. That’s the kind of call we take all over Burleson.
Call Carver Gate Repair Fort Worth for Burleson Gate Motor Service
If your gate motor in Burleson is acting up, stalled, or completely dead, call (817) 840-7067 now. We’ll answer with a person, not a prompt. We’ll give you a written price before any work starts. Every repair carries a written guarantee, good for a full year. If it fails inside that year, the second visit is free. That’s The Garrison Standard. That’s how Burleson homeowners get their driveways back.
Written by Lonnie Burke, owner of Carver Gate Repair Fort Worth, serving Burleson and the surrounding area. Lonnie has been running gate service to The Garrison Standard since 2008.