Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Access Control Cost in Fort Worth?
Gate access control in Fort Worth typically costs between $1,800 and $7,500 installed, with most single-family homes landing in the $2,500 to $4,500 range for a complete system that includes an operator, keypad or intercom, and basic wiring. Standalone component upgrades run lower: a quality keypad entry system starts around $400, while a full telephone entry system with electric strike for a shared driveway or small community gate runs $2,800 to $6,000. The final number depends on whether you’re retrofitting an existing gate or installing new, what entry method you want (keypad, card reader, intercom, or smartphone app), and how far the gate sits from a power source.
This guide breaks down real 2026 pricing for the Fort Worth market: what each component costs, what drives the price up or down, and what a written estimate should include before you sign anything. If you already have a gate and want a firm number, call (817) 840-7067 for a free on-site estimate. We give you a written price before any work starts, and that number doesn’t move.
Gate Access Control Cost Breakdown (2026)
Here’s what you should expect to pay in Fort Worth for gate access control work, broken into the pieces that actually show up on an invoice. These are installed prices unless noted, based on what we see across Tarrant County in 2026.
| Component or Service | Typical Installed Cost | Notes |
|---|---|---|
| Keypad entry system (replacement) | $400 – $900 | Includes weatherproof keypad, wiring to operator, programming |
| Keypad entry system (new install) | $700 – $1,400 | Requires conduit run and operator integration |
| Telephone entry system (single unit) | $1,200 – $2,800 | Cellular or VoIP; higher end includes directory and call forwarding |
| Telephone entry with electric strike | $2,800 – $6,000 | Common for shared driveways, small HOAs, and duplexes |
| Card reader / proximity system | $900 – $2,200 per reader | Commercial-grade; per-reader cost drops with multiple units |
| Smartphone app integration module | $500 – $1,500 | Adds app-based open/close to an existing operator |
| Vehicle loop detector (installed) | $600 – $1,500 | Mounted in driveway; auto-opens for exiting vehicles |
| Full system: operator + keypad + wiring | $2,500 – $4,500 | Typical single-family residential package |
| Full system: operator + telephone entry + loop detector | $4,500 – $7,500 | Higher-end or shared-entry configuration |
| Service call / diagnostic visit | $75 – $150 | Waived if you proceed with the repair |
Those ranges reflect the Fort Worth market specifically. Costs here run slightly below Dallas proper but above smaller surrounding towns like Weatherford or Burleson, mostly driven by drive time and local permit requirements in certain municipalities.
What’s included in a gate access control quote?
A written quote should itemize four things: the entry device itself, the control wiring or conduit run, the operator integration (tying the entry device into your existing gate motor), and any programming for codes, cards, or app access. Any quote that gives you one lump number without breaking these out deserves a second look. We write every price before work starts and itemize it so you can see exactly where the money goes.
What Affects Gate Access Control Pricing in Fort Worth
- Distance from power. Many Fort Worth homes have driveway gates set 50 to 150 feet from the house or any exterior outlet. Running conduit and low-voltage wire across that distance adds $300 to $900 depending on whether it can go through grass or has to cross concrete. Homes in older neighborhoods like Ryan Place or Berkeley Place often have mature trees and hardscape that make trenching slower.
- Gate operator compatibility. If you’re adding access control to an existing gate, the operator already installed determines a lot. LiftMaster and Ghost Controls operators integrate cleanly with most aftermarket keypads and app modules. Older DoorKing or Viking units sometimes need an adapter or a new control board, which runs $200 to $600 on top of the entry device.
- Entry method. A basic keypad costs less than a telephone entry system, which costs less than a full card reader setup with software. Smartphone-based systems like the Ghost Controls app or LiftMaster’s MyQ generally land between keypads and telephone entry on price, but they require good cellular signal at the gate location. Some rural pockets on the west side of Fort Worth around Aledo or Benbrook still have spotty signal, which matters.
- Existing gate condition. If the gate itself is rusty, sagging, or poorly mounted, adding access control means fixing the gate first. Hanging a $600 keypad on a gate that doesn’t swing level wastes your money. Expect $300 to $1,200 in gate hardware repair before access control work if the gate hasn’t been maintained.
- Single vs. shared entry. A single-family driveway gate needs one credential device. A shared gate serving two or three homes on a private drive in areas like Rivercrest or Monticello needs a system that handles multiple codes or call forwarding, which pushes you into telephone entry territory and a higher price.
- Time of year. Fort Worth spring storms keep gate technicians busier from March through June. Labor rates hold steady, but lead times for parts can stretch. Booking during slower months (January, February, late fall) doesn’t change the price, but it often means faster scheduling.
Key Takeaways on Fort Worth Gate Access Control Costs
- A complete residential gate access control system in Fort Worth runs $2,500 to $4,500 for most homes.
- Replacing an existing keypad is the lowest-ticket item: $400 to $900.
- Telephone entry systems for shared driveways run $2,800 to $6,000 installed.
- Power distance, operator brand, and gate condition are the three biggest price movers.
- A written, itemized quote protects you from door-moving prices. If a company won’t put it in writing, walk.
How Much Does a Gate Access Control Keypad Cost in Fort Worth?
A gate keypad in Fort Worth costs $400 to $1,400 installed depending on whether you’re replacing an existing unit or running new wiring. Replacement is the cheaper path since the conduit and wire are already in place. New installation means trenching, drilling the gate post, and pulling low-voltage wire back to the operator, which is why the labor portion climbs. Good keypads for the Texas climate need to be weatherproof and rated for direct sun. We’ve replaced plenty of units in Saginaw and Haslet that failed early because they were indoor-rated models that cooked in August heat. Spend the extra $100 for a sun-rated unit; it lasts five to seven years longer outdoors here.
How Much Does a Telephone Entry System Cost in Fort Worth?
A telephone entry system for a Fort Worth gate runs $1,200 to $2,800 for the unit itself, with full installation ranging from $2,800 to $6,000 when you factor in electric strike hardware, mounting pedestal, and wiring. These systems make sense for shared driveways, small gated communities in areas like Ridglea Hills, or any property where visitors need to call a homeowner’s phone to be buzzed in. The price difference between a single-resident and multi-resident unit is the directory capacity and whether it uses cellular or a landline connection. Cellular systems eliminate the need for a phone line but carry a monthly service fee of roughly $10 to $25 depending on the carrier.
Can You Add Smartphone Control to an Existing Gate?
Yes, in most cases. If your gate operator is a LiftMaster, Ghost Controls, or Mighty Mule unit manufactured in the last decade, adding app-based access control typically costs $500 to $1,500 installed. That includes the receiver module, wiring integration, and programming on your phone. Older DoorKing and Elite operators may need a newer control board first, which adds $200 to $600. The convenience is real: you can open the gate from anywhere, set temporary codes for delivery drivers, and see open/close history. What you give up is simplicity. If the internet or cellular signal goes down, the app quits working. Keep a physical keypad or a keyed manual release as a backup.
How to Save on Gate Access Control Without Cutting Corners
Saving money on gate access control in Fort Worth doesn’t mean buying the cheapest keypad on Amazon. It means spending once instead of twice. Here’s what actually keeps costs down.
1. Replace only what’s failing
If your keypad stopped working but the operator, wiring, and gate hardware are fine, replace the keypad. We see quotes from other companies that include a full operator swap when the only problem was a worn keypad membrane. A $400 replacement fixes what a $2,500 package also fixes, but one of those numbers is honest. Get an itemized written quote and look at what’s actually being replaced.
2. Fix the gate itself first
Access control components don’t fail on their own. A gate that slams, sags, or strains against the wind puts stress on the operator, which sends voltage spikes through the control board and fries keypads and receivers. Spending $500 on gate hardware repair before a $1,200 access control system often saves you from replacing that system again in two years. In Fort Worth, the constant south wind in open areas like Crowley and Joshua accelerates this wear.
3. Choose the right operator brand for your setup
Carver Gate Repair works on nine gate motor brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Matching the access control hardware to the operator already in the ground matters. We stock parts for all nine, which means we’re not forcing a conversion kit when a direct-fit part is available.
4. Get a written price before anyone starts
This isn’t a pricing hack; it’s how you avoid inflated invoices. The Garrison Standard at Carver Gate Repair means you receive a written price before any work starts. The number you’re quoted is the number you pay. No arrival adjustments, no mid-job discoveries that double the bill. Call (817) 840-7067 and ask for a free estimate. When we arrive, you’ll have the number in your hand before the first tool comes out.
How Gate Access Control Installation Works (Step by Step)
Here’s the sequence we follow on a typical Fort Worth gate access control installation, from the first call to a working system.
- Phone call and free estimate. Call (817) 840-7067. A live person answers, day or night. We ask about your gate type, operator brand, and what’s not working or what you want added. We schedule a site visit at a time that works for you.
- On-site evaluation. A background-checked, uniformed technician arrives, inspects the gate, operator, wiring, and existing access control hardware if any. We check power availability, measure conduit runs, and test the operator. This is when we identify any gate hardware issues that would undermine a new system.
- Written quote. Before any work begins, you get an itemized written price covering the entry device, wiring, integration, and any gate repair needed. That price is fixed. It does not grow once the job is open.
- Installation. We mount the keypad, intercom, or reader, run and secure all wiring in conduit, integrate with the existing operator or install a new one, and program all codes, cards, or app access. The work site is left clean. No wire scraps, no trench left open.
- Demonstration and guarantee. We walk you through the system, show you how to add or remove codes, and test everything. You receive a written guarantee on the repair, good for a full year from the date of service. If it fails inside that year, we return at no charge.
FAQs – Gate Access Control Cost
Is gate access control worth the cost?
For most Fort Worth homeowners, a $2,500 to $4,500 investment in gate access control pays back in daily convenience and a measurable bump in perceived security. If you’re manually opening a gate every time you leave the driveway, or walking out to the gate to let delivery drivers in, the cost per use drops fast. And on the security side, a property with a gated entry and keypad access is a less attractive target than an open driveway. Call (817) 840-7067 for a free estimate and we’ll give you a firm number for your specific gate.
How much does it cost to replace a gate keypad in Fort Worth?
Replacing a gate keypad in Fort Worth runs $400 to $900 installed. That includes the new weatherproof keypad, wiring to the operator, and programming for all user codes. If the keypad is the only failed component, this is a same-day job in most cases.
How much does a gate motor cost in Fort Worth?
A new gate motor (operator) in Fort Worth runs $1,200 to $3,800 installed depending on the brand and gate type. LiftMaster and Ghost Controls residential swing operators sit at the lower end. Viking and DoorKing commercial-grade operators run higher. The operator is usually the biggest single line item in a full access control project.
Can you add a keypad to an existing gate?
Yes, you can add a keypad to nearly any existing gate operator. Expect to pay $400 to $1,400 depending on whether new wiring must be run and whether your operator needs a control board upgrade. Older DoorKing and Elite units sometimes need a $200 to $600 board swap first.
How long does gate access control installation take?
Most residential gate access control installations in Fort Worth are done in one visit, four to six hours on site. Jobs that require long trenching runs, new operators, or telephone entry systems with electric strikes can take a full day. We give you a clear time window when the written quote is delivered.
Do you guarantee gate access control work?
Yes. Every repair and installation from Carver Gate Repair Fort Worth carries a written guarantee good for a full year from the date of service. If the repair fails inside that window, we return and fix it at no charge. That’s the 365-Day Done Right Promise, and it’s in writing on every job, not in a brochure.
Why Fort Worth Homeowners Choose Carver Gate Repair
Lonnie Burke runs Carver Gate Repair Fort Worth to a specific standard: show up when you say you will, give a written price before any work starts, and stand behind the work for a full year. The crew works under The Garrison Standard, which has governed every Garrison Partners location since 2008. That means background-checked, uniformed technicians on every call. It means the phone is answered by a living person 24 hours a day, seven days a week, including weekends and holidays. It means if the repair fails inside the guarantee window, the second visit is free. No argument, no fine print.
We work exclusively on gates and gate motor systems. That focus matters because gate access control isn’t a side job here. It’s the only job. Across home and commercial properties in Fort Worth, our technicians are trained on nine major gate motor brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We don’t show up with a generic kit and hope it fits. We match the part to the system in your driveway.
If you’re comparing gate access control quotes in Fort Worth, ask each company three questions: Is the price in writing before work starts? Is the technician background-checked? Is the guarantee in writing and for how long? Any company that hesitates on those answers is telling you something. Gate access control in Fort Worth is a competitive market, but the difference between bids usually shows up in what’s not included.
Get a Free Gate Access Control Estimate in Fort Worth
You should know the real number for your gate before you decide anything. Call (817) 840-7067 and we’ll schedule a free on-site estimate. A background-checked, uniformed technician from Carver Gate Repair Fort Worth will inspect your gate, walk you through options at different price points, and hand you a written, itemized quote. The number on that page is the number you pay. If you’re not ready to commit, keep the quote. It’s good for your planning either way.
Pricing reflects the Fort Worth market as of 2026. Carver Gate Repair Fort Worth offers free estimates – call (817) 840-7067.
Written by Lonnie Burke, Owner at Carver Gate Repair Fort Worth, serving Fort Worth and surrounding Tarrant County communities.
What Our Customers Say
"Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F."Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Photo eyes cleaned and aligned. Gate stops for the dog like it should."
- Henry B.