Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Azle
A new driveway gate in Azle typically costs between $4,800 and $18,000 installed, depending on the gate style, operator, and soil work. Most installations here take one to two days on site, with the concrete work scheduled separately so it cures properly. We answer the phone around the clock, and a live person will give you a straight answer about scheduling a free measure in Azle. Call (817) 840-7067 and we’ll put a written price in front of you before any work starts.
Why Carver Gate Repair Fort Worth Is Azle’s Preferred Gate Installation Company
Lonnie Burke leads our Gate Repair - Azle crews, and every technician who shows up is background-checked and in uniform. You’ll know exactly who is walking onto your property. That matters to a lot of Azle homeowners we talk to, especially in neighborhoods where contractors have burned them before with no-shows and inflated invoices.
We’re part of the Garrison Partners family, which has operated to The Garrison Standard since 2008. The Standard is simple: a written price before work starts, a written guarantee on every repair, and a free second visit if something fails inside the guarantee window. None of that is an upsell. It’s the floor. And it applies to every Azle job we take, no exceptions.
Our Fort Worth shop dispatches crews to Azle, typically same-day or next-day for estimates. When you call, a live person answers. Not a queue, not a voicemail. That’s 24 hours a day, 7 days a week, including weekends and holidays. If your gate is stuck open at 11 p.m. and you live off Liberty School Road, someone picks up and talks to you.
We’ve worked throughout Azle long enough to know the soil and the housing stock. The clay out here does things to gate posts that you don’t see in Fort Worth or Southlake. Our estimates account for that. We don’t guess. We dig, we set, and we build the gate to stay square.
Key takeaways:
- Written price delivered before any work begins, every time.
- Background-checked, uniformed technicians on every Azle job.
- Full-year written guarantee on every repair, with a free second visit if needed.
- Live-person phone coverage 24/7, no voicemail runaround.
- We install gates and operators from Gate Installation through automation and access control, matched to the specific hardware on your property.
Styles & brands we work with
Sliding Gate Installation in Azle
Sliding Gate Installation in Azle is one of the most common requests we get from homeowners with long driveways off FM 730 and Liberty School Road. A sliding gate rides on a track mounted to a concrete pad, and the operator moves it horizontally instead of swinging it. For properties with limited space or sloped approaches, a slide gate is often the only practical option. In Azle, the challenge is always the soil. Expansive gumbo clay heaves with moisture, and a track that was level in October can be a quarter-inch high in April. We set slide gate tracks on reinforced concrete pads with deeper footings than the manufacturer minimum, because we know what the clay does. A sliding gate installed correctly in Azle should keep running through wet springs and dry summers without binding.
Track Alignment and Soil Movement
Before we pour concrete for a slide gate in Azle, we check the grade and the drainage path. Water pooling under the track during a wet spring shifts the pad. We’ll run a crown in the concrete so water sheds away from the rollers, and we set the track on a section that’s reinforced with rebar.
Operator Placement and Protection
The operator for a sliding gate mounts on a concrete pad beside the gate or on a pedestal. We favor operators that run on DC power with battery backup here, because North Texas storms knock out grid power often enough that an AC-only operator leaves you locked out. The LiftMaster and DoorKing slide operators we stock hold up well in the heat, and we keep common parts on hand for Azle service calls.
Gate Opener Installation in Azle
Gate Opener Installation in Azle means matching the right operator to the weight of the gate, the length of the driveway, and the storm exposure of the property. We install swing and slide operators from Ghost Controls, LiftMaster, DoorKing, and Elite, among others. On an Azle property with a 600-pound ornamental iron swing gate, we won’t put on a light-duty residential arm. We’ll size the operator to the gate weight plus the wind load it catches during spring storms, and we’ll set the limit switches and force settings so the gate stops cleanly every time. A proper opener installation in Azle runs $1,200 to $3,800 depending on the operator class and whether you need battery backup, solar, or a new keypad and intercom tied in.
Battery Backup and Surge Protection
Lightning is frequent near Eagle Mountain Lake, and a direct strike or a nearby hit can fry a control board instantly. We recommend a surge protector at the operator’s disconnect and a battery backup on every automatic gate in Azle. The battery keeps the gate functional long enough for you to get in or out when the power’s down.
Entrapment Protection
Every automatic gate we install in Azle gets UL 325-compliant entrapment protection: photocells, a reversing edge, or both. That’s code, and it’s also the only way to run a gate that opens and closes around kids, pets, and delivery drivers. We test every sensor before we leave the site.
Trusted Brands We Service in Azle
Our technicians work on nine gate-motor brands, so when an Azle homeowner has a Gate Opener Installation job on an existing Ghost Controls, DoorKing, or Elite system, we match the new hardware to what’s already there rather than forcing a full rip-out. We keep common parts for these brands on our trucks and in our Fort Worth shop, which means less waiting on a slow supply chain for an Azle repair or install. Whether the gate is an older Mighty Mule on a pasture entrance or a newer LiftMaster on a custom residential driveway, the right parts and the right programming are the whole job.
Common Gate Installation Problems We See in Azle Homes
- Heaved post footings from gumbo clay. Azle’s clay expands and contracts so much that a 4-foot post footing set without rebar can move a quarter-inch in one wet spring. The hinge post tilts, the gate drags, and the operator burns out trying to move the weight. We use deeper footings, helical piers where the soil is worst, and oversized concrete pads.
- Heat-warped ornamental iron frames. August heat in Azle softens and warps iron gates that were fabricated too light. A warped slide gate binds on the rack, and the plastic drive gears inside the operator strip. Heavier gauge steel and a sag correction bracket prevent most of this.
- Lightning-fried control boards and loop detectors. Spring storms off Eagle Mountain Lake bring strikes that kill boards and detectors. An automatic gate will sit dead or stay stuck half open. Surge protection and battery backup solve the repeat-failure problem.
- Long driveways with dated wiring and sensors. Rural acreage homes around Azle often have old low-voltage wire run hundreds of feet from the house to the gate. Voltage drop makes the opener erratic, and mismatched sensors mean the gate won’t close. We run new direct-burial wire and recalibrate the sensors when we install.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Installation in Azle, TX
A sliding gate install in Azle runs $5,500 to $15,000 when it includes a concrete pad, steel or ornamental iron gate, and an automatic operator. Swing gates run $4,800 to $12,000 for a single, and $9,000 to $18,000 for a double gate with matched operators. The big variable here is soil work. Post footings in Azle need more concrete and often helical piers because of the clay, and that adds $800 to $2,500 to the job compared to a town with stable sandy soil. Gate material matters too: steel tube is the lower end, ornamental iron the higher. Every quote is written, broken down line by line, and agreed to before we order anything.
We also serve Azle and the surrounding communities with the same Garrison Standard on every job, from a small pedestrian gate to a full automatic driveway entry. Call (817) 840-7067 and we’ll schedule a free measure.
We Also Serve Cities Near Azle
Our crews cover Azle and the surrounding North Texas communities, including Gate Installation in Azle, Haltom City, Fort Worth, Southlake, and Bedford. If your property sits just outside the Azle city limit, call and ask. We’ll tell you straight if we can get a crew there, and when.
Serving Azle, TX - Our Local Coverage Area
We’re based in the Azle area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Azle
For an automatic gate in Azle, we set post footings 3.5 to 4 feet deep with rebar reinforcement, and we use helical piers when the soil is especially unstable or the gate is heavy. The manufacturer minimum is often 30 to 36 inches, but Azle’s gumbo clay heaves enough that the extra depth and a larger diameter are what keep the posts plumb. The original post footings on the lakeside properties we work on are often 2-foot precast blocks that have tilted over the years. We pull those out and start over. Call (817) 840-7067 if you’re planning a gate and want the soil looked at first.
Yes. We install automatic gates on long rural driveways throughout Azle, including the acreage lots off Liberty School Road and around Eagle Mountain Lake. The main considerations are the distance from the house to the gate for power and communication wiring, whether you want a keypad or intercom at the road, and the gate’s exposure to wind. We run the wire, we set the operator, and we size the gate’s weight rating to handle the wind load. Estimates are free, and you’ll get a written price before work starts.
A DC-powered operator with a metal gear drive holds up best in Azle’s heat. DC operators run cooler, use less current, and usually come with battery backup that keeps the gate working when storms take down the power. We lean away from light-duty residential operators with plastic drive gears on any gate that catches full sun and gets hot enough to warp. For most Azle installations we specify LiftMaster, DoorKing, or Elite operators with a surge protector at the disconnect.
Yes. UL 325 requires entrapment protection on every automatic gate opener, and we install photocells and reversing edges as standard. The sensors detect a person, pet, or vehicle in the gate’s path and reverse the gate before it applies force. We test them at installation and show you how to keep the lenses clean, because Azle’s dust and spring pollen will coat a photocell fast. Call (817) 840-7067 and we’ll walk you through what your gate will need.
A well-fabricated ornamental iron gate on properly set footings in Azle should stay square for years, but the clay soil will work on it. We include a sag correction bracket at the hinge post on heavy swing gates so the gate can be adjusted if the post shifts a fraction. We also recommend checking the hinge bolts and the operator’s limit settings once a year. The 365-Day Done Right Promise covers our work for a full year in writing, and a free second visit comes with it if something we installed doesn’t hold.
Get a Free Gate Installation Estimate in Azle
If you live in Azle, call (817) 840-7067 and ask for a free measure. We’ll schedule the visit, look at your driveway, your soil, and your existing gate, and then hand you a written quote. The number won’t move once you approve it. That’s the Garrison Standard, and it applies to every gate we install in Azle.
Written by Lonnie Burke, Owner at Carver Gate Repair Fort Worth, serving Azle and surrounding communities.