Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Azle
Gate repair in Azle means dealing with wide ranch entrances, long driveways, and clay soil that moves under your operator pad every time it rains hard. We respond to Azle calls throughout the week with crews who know the difference between a Fort Worth subdivision gate and a 20-foot tube gate on an acreage property off Liberty School Road. If your slide gate has jumped its track or your swing gate is dragging on the hinge post, call (817) 840-7067 and you’ll get a live person, not a voicemail box.
Why Carver Gate Repair Fort Worth Is Azle’s Preferred Gate Repair Company
Lonnie Burke runs our crew to one standard: written prices, background-checked technicians, and a guarantee in writing on every repair. Azle homeowners call us because the number never moves at the door and the person who shows up is the same person whose name was on the dispatch. We work exclusively on gates and gate motors, so when we tell you the rack is twisted on your Viking slide opener, it’s because we’ve pulled that exact failure apart before.
Every Gate Repair job we take follows The Garrison Standard that Carver Gate Repair has operated under since 2008. That means each technician arrives in uniform, keeps the pad and track area clean, and clears the site before he leaves. Dispatch for Azle is coordinated from the brand’s Dallas-Fort Worth office, and our crew response to Azle is measured in hours, not days. The 365-Day Done Right Promise covers a full year from the date of service, and if something isn’t right inside that window, the second visit is free. No charge, no argument.
Written by Lonnie Burke, Owner at Carver Gate Repair Fort Worth, serving Azle and the surrounding area.
Styles & brands we work with
Iron Gate Repair in Azle
Iron gate repair in Azle typically runs $175 – $420 for hinge replacement, post straightening, weld repair, and rust treatment, depending on the size of the gate and the condition of the post footing. The iron gates we see on Azle acreage properties are usually ornamental or steel tube, and the failure points follow a pattern: hinge welds crack after years of the gate fighting a sagging post, then the latch side drags, then the operator burns itself out pulling a gate that’s 40 pounds heavier on one side than the other.
Post And Footing Work
When a gate post leans, the problem is almost never the post itself in Azle. The gumbo clay around the footing swells and shrinks with moisture, and a 12-inch footing that was solid five years ago is now wobbling in a bowl of loose soil. We re-anchor the post, re-square it to the gate, and set the hinge geometry so the gate swings free instead of dragging.
Weld And Rust Repair
North Texas humidity and occasional freezes put rust on any unprotected iron, especially near the bottom rail where water pools. We grind out the rust, weld in new steel where the section is compromised, and repaint the repair. A well-repaired iron gate in Azle should go another decade before the welds are the weak point again.
Sliding Gate Repair in Azle
Sliding gate repair in Azle typically costs $220 – $560 for track realignment, roller replacement, rack repair, and operator reset, with heavier work like re-pouring a cracked operator pad priced after we see the damage in person. Wide slide gates on ranch properties have a long lever arm working against the post, and the soil under the track is the enemy. When the clay heaves, the track bows, the rack pulls away from the pinion, and the operator trips its torque limit before the gate gets halfway across the opening.
Track And Rack Alignment
A slide gate that runs true on a flat commercial slab will bind on an Azle driveway where the ground has shifted a half-inch over a 10-foot run. We re-level the track, re-shim the rollers, and reset the rack so the pinion drives clean. If the pad under the operator has cracked, we saw out the broken section and re-pour before we touch the gear.
Oversized And Ranch Gates
Sixteen- and twenty-foot tube gates need rollers matched to the weight, not whatever came out of the box with the opener. We size the hardware to the gate, set the stops, and adjust the operator’s force limits so the gate doesn’t hammer its own frame every time it closes. The work is slow and precise, and it’s why this repair doesn’t belong on a handyman’s list.
Trusted Brands We Service in Azle
Our technicians are trained on nine gate-motor brands, and in Azle we see a lot of Linear, Viking, Ghost Controls, and DoorKing operators on both swing and slide applications. We keep common boards, limit switches, and photocells stocked for these brands so a Monday call on a dead Viking opener doesn’t turn into a two-week parts wait. Whether the system came with the house or the previous owner had it installed in 2004, we match the right parts to the motor already on the post.
Common Gate Repair Problems We See in Azle Homes
- Clay heave under operator pads and footings. Heavy spring rain swells the gumbo clay under the concrete, tilting the pad just enough that the rack and pinion bind and the motor stalls mid-travel.
- Sagging wide tube gates. A 16-foot farm gate without a mid-rail brace will sag at the hinge post within a few years. The latch side drags, the operator works harder, and eventually the hinge welds tear out.
- Solar opener battery failure in winter. Cloudy North Texas winters don’t put enough charge back into the panel. The battery drains, the gate dies, and a homeowner on a long driveway with no mains power is locked into calling for a service visit.
- Sensor and photocell faults after storms. Lightning and wind-blown debris knock photo eyes out of alignment, and a misaligned sensor means the gate refuses to close or reverses mid-travel.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Azle, TX
Here’s what gate repair in Azle costs, in plain ranges. Iron gate hinge and weld repair: $175 – $420. Sliding track realignment and roller replacement: $220 – $560. Gate operator board or limit switch replacement: $190 – $480. Full operator replacement on a swing gate: $950 – $2,600, depending on brand, weight capacity, and whether we’re adding solar or tying into existing mains power. Every quote is written and agreed before any work starts. The number doesn’t move when the job opens up. Call (817) 840-7067 and we’ll schedule a free estimate on your gate, whether it’s a Viking slide at the road or a tube gate on the back forty.
We Also Serve Cities Near Azle
While this page speaks to Azle homeowners directly, our crews also work in Haltom City, Fort Worth, Southlake, and Bedford. If you’re just outside Azle and the gate died overnight, don’t assume you’re outside our service area. Call and we’ll get a crew directed your way.
Serving Azle, TX - Our Local Coverage Area
We’re based in the Azle area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Azle
The clay under your track is heaving when it gets wet, bowing the rail enough that the gate wheels lift off center and the gate walks itself out of the track. The fix is re-leveling the track, re-shimming rollers, and sometimes re-anchoring the operator pad so the whole run stays flat through a wet season. Call (817) 840-7067 and we’ll look at the pad and track before quoting anything.
Yes, solar is practical on long Azle driveways where trenching mains power would cost more than the gate itself. The consideration is battery sizing and winter charge, because cloud cover from November through February doesn’t recover the panel fast enough if the gate cycles often. We spec the panel and battery for your gate’s weight and daily cycles, then install it so the gate works on the shortest days of the year. Estimates are free.
Entrapment protection is the photocell and reversing system that stops the gate if someone or something is in the path. When we repair a gate, we test that protection as part of the job, not as an upsell. A gate that moves without working safety photocells is a liability on your property, and it’s the first thing we verify before we sign off the work. The test is standard on every repair, written into the guarantee.
Usually no. Sag happens because the hinge post has moved or the hinge welds have stretched, not because the whole gate is shot. We re-plumb the post, reinforce the hinge mounts, and often add a mid-rail brace so the sag doesn’t return. Steel tube gates from the 1980s and 1990s are thicker than most new ones, so repair is usually the better money. Call us for a look before you buy a replacement.
If the operator is original to the house, replacement is usually the better long-term move. Parts for 1980s units are scarce, and a new operator with current safety features will cost less than patching an old motor every other season. We can quote both options in writing before you commit. Call (817) 840-7067 and we’ll give you a straight answer on whether the old unit is worth saving.
Call Carver Gate Repair Fort Worth for Gate Repair in Azle
If your gate is stuck open, dragging on the track, or dead at the keypad, call (817) 840-7067 and speak to a live person. We’ll schedule a written estimate, get your gate moving again, and stand behind the repair for a full 365 days. Azle gates fail differently than suburb gates, and we’re set up for exactly that kind of work.
Written by Lonnie Burke, Owner at Carver Gate Repair Fort Worth, serving Azle since 2008 through the Garrison Partners family of brands.