Gate Repair in Southlake - Same-Day Repair, Priced Before We Start

Fast, Reliable Gate Repair Across Southlake

Gate repair in Southlake typically runs $180 – $650 for most mechanical fixes, and $450 – $1,400 when the job involves post footings or operator replacement. We get called out to Southlake for sagging wrought-iron driveway gates, wind-damaged operators, and HOA-mandated repairs more than anything else. Carver Gate Repair sends background-checked, uniformed technicians from our Dallas-Fort Worth office to Southlake every day. If your gate is stuck, dragging, or failed after a storm, call (817) 840-7067 and a live person answers, 24/7.

Call (817) 840-7067

Why Carver Gate Repair Fort Worth Is Southlake’s Preferred Gate Repair Company

Southlake’s gate systems are rarely the lightweight kit gates you see in track-home suburbs. We work on solid iron infill gates, heavy wooden driveway gates, and multi-acre estate entries where the operator has to move real weight every cycle. That’s why our crews carry the tools and parts for the gate styles common here, not just a van full of generic hardware.

Every job starts the same way. We give you a written price before any work begins. The number doesn’t move at the door. That’s The Garrison Standard, and it’s been the operating rule for every Carver Gate Repair location since 2008. A full-year written guarantee backs every repair. If the fix fails inside 365 days, we come back free. No charge, no argument, no re-quoting.

Lonnie Burke runs the Fort Worth operation, and the crews answer to that standard on every dispatch. Phones are staffed around the clock, so when a storm knocks out your gate at 2 a.m. and the gate is stuck open, a real person picks up.

Wood Gate Repair in Southlake

Wood Gate Repair in Southlake usually means a heavy cedar or oak driveway gate that has started dragging, binding, or splitting at the hinge points. These gates are common on the larger estate lots here, where a wood gate and iron fence combination is part of the property’s look. The weight of a solid wood gate puts constant stress on hinges, and when the post shifts even an inch, the gate starts catching on the ground.

Typical wood gate repair in Southlake runs $220 – $520 for hinge replacement, gate realignment, and latch adjustments. When the post itself has rotted or shifted in saturated soil, the job starts around $600 and goes up from there, because the post has to be reset and re-set before the gate can be re-hung correctly.

Hinge Replacement and Realignment

A sagging wood gate almost always traces back to the hinge side. We replace worn or bent hinges, shim the gate back to plumb, and check the post for movement. If the post is solid, this is a same-visit fix in most cases. If the post moves, the real repair is in the footing, not the hinge.

Wood Rot and Structural Repairs

North Texas gets long dry spells then heavy rain. That cycle is rough on wood gates. We cut out rotted sections, sister in new material, and re-treat the repair so it blends with the existing gate. Southlake homeowners with painted gates get paint-matched patches; stained gates get stain-matched work done on site.

Driveway Gate Repair in Southlake

Driveway Gate Repair in Southlake covers the automated entry gates on properties along Southlake Boulevard, Continental Boulevard, and the estate streets off Dove Road. These are working gates, not decorations. They cycle multiple times a day, hold back traffic, and protect the property. When they fail, they fail at the worst time.

Repairs on automatic driveway gates in Southlake run $320 – $1,400 depending on what’s failed. A limit switch or photocell replacement is on the lower end. A swing operator replacement with new arms and a control board is at the higher end. We give the written price before any work starts, so you know the number before we touch a tool.

Storm-Damaged Operators and Control Boards

Power surges during Southlake thunderstorms are a known killer of gate control boards. When lightning or a downed line sends a spike through the system, the board often fries while the motor itself is fine. We diagnose the board first, replace it when needed, and re-check every limit switch and safety input before the gate runs again.

Wind-Driven Misalignment on Solid Infill Gates

Solid infill gates catch wind like a sail, and Southlake gets real wind. Over time, the wind load torques the hinge post out of plumb. The gate starts dragging on one corner, then fails to close. We reset the post in the footing, re-true the gate, and verify the operator’s force settings are right for the gate’s weight and wind exposure.

Trusted Brands We Service in Southlake

We’re trained on the gate motor brands Southlake homeowners actually have installed. That includes LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We keep common boards, arms, and safety components staged locally so a Southlake repair doesn’t wait on a parts shipment from out of state. If your gate runs on a Ghost Controls or Elite system and it’s not responding, we can usually have a tech out the same day with the right part in hand.

Common Gate Repair Problems We See in Southlake Homes

• Hinge posts heaving out of plumb. Southlake sits on expansive clay soil. After heavy rain, the clay swells and pushes shallow post footings upward. Then the gate drags. We reset the post with a deeper footing and, on heavy iron gates, add a structural steel core inside the post.
• Ornate iron gates with HOA-mandated design matching. In neighborhoods like Carillon and Clariden Ranch, a replacement hinge post or repair panel has to match the original design exactly. We work with local fabricators who can replicate custom scrollwork and finials so the repair passes HOA inspection.
• Solid infill gates that won’t close after wind storms. The wind pushes the gate, the operator’s close limit gets off, and suddenly the gate stops two feet short. That’s a limit switch adjustment and sometimes a new arm, not a new operator. We fix the actual problem, not the symptom.
• Control boards dead after power surges. Summer storm season brings lightning and line surges. A dead board leaves a heavy gate stuck in whatever position it was in. We replace the board, check the transformer and wiring, and get the gate back in service.

Pricing for Gate Repair in Southlake, TX

We Also Serve Cities Near Southlake

Our Gate Repair crews cover Southlake and the surrounding cities daily. If you’re in Bedford, Haltom City, Fort Worth, or Azle, the same Garrison Standard applies: written prices, background-checked techs, and a full-year guarantee. For the full picture of what we do across the metro, see Gate Repair in Southlake and the nearby areas we serve.

FAQs About Gate Repair in Southlake