Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Southlake, TX | Carver Gate Repair Fort Worth
We provide independent Ghost Controls service across Southlake, from single swing gates in Carillon to custom slide systems on multi-acre estates. The one thing that makes our Ghost Controls work here different is that we treat the gate and the opener as one system, because a Ghost Controls motor on a Southlake wrought iron gate carries more weight, faces more heat, and answers to stricter HOA rules than the same motor anywhere else in the metroplex. We stock Ghost Controls OEM parts and live-person phone coverage runs 24/7. Call (817) 840-7067 for a written estimate before any work begins.
Why Southlake Residents Choose Us for Ghost Controls Service
Lonnie Burke, owner of Carver Gate Repair Fort Worth, grew up in the San Fernando Valley and learned metalwork and mechanical systems at Los Angeles Trade-Technical College before spending nearly two decades in gate repair. He and the crew have worked Ghost Controls openers across Southlake long enough to know the failure patterns specific to this area: solar batteries draining under the oaks in Clariden Ranch, control boards cooking inside black metal enclosures on August afternoons, and photocells knocked out of line by mowing crews working around gate posts. We’re an independent service provider, not a factory-authorized shop, which means we’re free to recommend the right fix instead of a forced replacement. Ghost Controls sales & service is one of nine gate motor brands we work on, but in Southlake, this one shows up most often on estate properties. Every tech is background-checked and uniformed, and every repair carries a written guarantee good for a full year.
Styles & brands we work with
Common Ghost Controls Gate Repair Problems We Solve in Southlake
- Wheel and carriage bearing wear on heavy slide gates. Southlake’s custom slide gates tend to be longer and heavier than production gates, often 20 feet or more of welded wrought iron. Ghost Controls slide openers work hard to drive that mass. Over time, bearings in the carriage wear flat, the gate starts to jerk, and the opener trips on overload. We replace bearings, carriage assemblies, and guide rollers, then re-set the limit switch travel so the motor isn’t fighting a bind.
- Photocell misalignment after storms or landscaping. North Texas storms push photocells out of plane, and mowing crews constantly bump the posts they’re mounted on. A Ghost Controls opener that won’t close all the way, or reverses for no reason, is often a misaligned photo eye, not a bad board. We re-aim, shim, and secure the cells, then test both the closing and obstruction detection circuits.
- Battery drain in solar Ghost Controls systems due to tree shade. Southlake’s large oaks and crepe myrtles are beautiful and terrible for solar panels. A TSS1 solar kit that ran fine in full sun may struggle once the canopy fills in. We evaluate panel orientation, test the battery under load, and move or add panels where HOA rules allow.
- Control board overheating inside metal enclosures during 100°F+ afternoons. Ghost Controls boards are reliable until they bake. On hot Southlake days, a black steel enclosure in direct sun can push internal temps past what the board tolerates, causing intermittent starts and stops. We install vented enclosures, relocate boxes to shaded posts, and test capacitors before condemning a board.
- Dual gate sync failure on double wrought iron entries. When one leaf opens and the other doesn’t, the cause is usually a bent arm bracket, a jammed hinge, or a failed slave connection, not a dead motor. We had a call in Carillon where a Ghost Controls AX30 on a double wrought iron gate was opening one leaf but not the other after a spring hailstorm. Our tech found a bent arm bracket on the slave gate and a photocell knocked out of alignment by lawn equipment. We realigned the cell, installed a new bracket, and reprogrammed the synchronized close. No new opener required.
Ghost Controls Service in Southlake: What Local Conditions Mean for Your Equipment
Southlake’s Carillon and Clariden Ranch HOAs require that any Gate Repair in Southlake match the original iron design and finish. That rule changes how we approach Ghost Controls work here. A generic opener replacement on a standard iron gate is straightforward, but on a custom double gate in Carillon, a new Ghost Controls arm may not bolt onto the old bracket without modifying it. We often source custom-fabricated brackets and repaint them after Ghost Controls opener replacements, so the hardware matches the rest of the iron and clears HOA review. This matters because some HOA architectural committees require approval before replacing visible gate hardware. We coordinate that with the designer or fabricator when needed, and we document what changed. In neighboring cities with less formal oversight, a repair is just a repair. In Southlake, the finished look and finish have to be right on the first pass, or the HOA sends you back to do it again. That’s the local reality we plan around.
Ghost Controls Models & Products We Service in Southlake
We service the Ghost Controls premium swing gate opener kit, which includes the AX30 and AX40 systems, the bright white and black slide gate opener kits, the dual gate opener kit for paired swing entries, and the TSS1 solar gate opener kit. On every job we follow a simple rule: OEM parts where precision matters, locally fabricated or aftermarket parts where the original is weak or overpriced. Ghost Controls control arms, motion sensors, and solar panels we replace with OEM. Cosmetic brackets, mounting plates, and structural reinforcement we’re willing to source from local Texas fabricators when that gives the gate a stronger repair. We also never hang a new motor on a failing gate structure. If the track, hinges, or posts are compromised, we tell you before spending on electronics. Southlake service area coverage includes all the estate subdivisions and gated communities within city limits.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Southlake
The cost to repair a Ghost Controls opener in Southlake depends on what’s wrong and what’s worn. Here’s what we charge based on the work involved:
| Service | Typical Price Range in Southlake |
|---|---|
| Diagnostic service call (credited to repair) | $85 to $125 |
| Photocell realignment or replacement | $140 to $260 |
| Battery replacement for solar Ghost Controls opener | $180 to $320 |
| Limit switch adjustment or replacement | $150 to $280 |
| Control board replacement | $275 to $475 |
| Complete opener replacement (labor plus opener) | $850 to $1,800 |
Every quote is written before work starts, so the number you approve is the number you pay. Free estimate, yes. We’ll come out, diagnose, and send you the price. Call (817) 840-7067 if you want a real number for your gate.
Serving Southlake, TX - Our Local Coverage Area
We’re based in the Southlake area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Southlake
In most cases yes, if the opener was matched to the gate’s weight class when first installed. The problem we see in Southlake is gates that were fine ten years ago but gained weight as owners added decorative panels, heavier hinges, or new powder coat. A Ghost Controls AX40 is rated for heavier swing gates; an AX30 on a heavier gate will labor and fail early. If your gate has been modified, we’ll check the arm stroke and motor draw before recommending anything. Call (817) 840-7067 and we’ll verify what you have and what it’s actually being asked to move.
Sort of. The TSS1 solar kit works well when its panel gets direct sun for most of the day. In Southlake neighborhoods with mature oaks and crepe myrtles, the panel often gets partial shade, especially in summer when the canopy is fullest. That means the battery drains faster than the panel can recharge it. We fix this by repositioning the panel, cleaning it, testing the battery, and sometimes adding a second panel. If your solar opener is beeping low battery, we’ll diagnose it for $85 to $125, which is credited toward the repair. Call (817) 840-7067 to schedule.
It affects visible hardware. The Clariden Ranch HOA requires that any gate repair match the original iron design and finish, which means if we replace a Ghost Controls arm or bracket, the new part needs to blend with the existing iron. We source custom-fabricated brackets and repaint after replacement so it clears HOA review. If your HOA requires pre-approval for the work, we’ll give you a written description of the parts and finishes we’re using, which is standard with our Gate Installation in Southlake. That’s part of the written estimate.
The beep you’re hearing is almost always the motor drawing too many amps, and heat makes it worse. In Southlake’s 100°F afternoons, the metal enclosure around the control board gets hot enough to trip thermal protection or cause the board to misread the amp draw. It can also be a gate binding from the metal expanding in the heat. We test the board temp first, then check the gate’s movement with the motor disengaged. Call (817) 840-7067 and we’ll find which one it is.
Yes. Ghost Controls has its own app and wireless keypad, and most kits pair with smart home hubs through a relay or dry contact module. We wire the system into Control4, Crestron, or Apple HomeKit when the gate board supports it and the signal path is solid. For some older Ghost Controls boards we add an external relay module rather than replacing the board. The integration itself is often simpler than people think. Call (817) 840-7067 and we’ll tell you what your setup can do.
Service Areas Near Southlake
We run calls through Southlake and into the nearby communities. Ghost Controls service in Bedford covers the neighborhoods along 183 and Colleyville border. Ghost Controls service in Fort Worth reaches west and south of the Southlake border. We also serve Burleson, Mansfield, and Benbrook for older gate systems that predate the current HOA designs.
Book Your Ghost Controls Service in Southlake Today
Tell us what your Ghost Controls gate is doing wrong, and we’ll tell you exactly what it needs. Lonnie keeps a notepad in the truck for a reason: you’ll know what was wrong and what we did before you see the invoice. Call (817) 840-7067 for a free estimate. Same-day service is available for emergency repairs in Southlake.
Written by Lonnie Burke, Owner at Carver Gate Repair Fort Worth, serving Southlake and the Dallas-Fort Worth metro area since 2008.