Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Lake Worth, TX
Carver Gate Repair handles gate repair, installation, and motor work throughout Lake Worth, TX, and the jobs here look different from what you’d find ten miles south on the city grid. Lake Worth properties run toward the semi-rural end of the spectrum, with long dirt and gravel driveways, galvanized and powder-coated steel tube gates, and horse properties where a failing gate isn’t a minor annoyance, it’s a livestock containment problem. The soil moves, the wind doesn’t quit, and the heat does real work on hinges and circuit boards. If your gate isn’t closing square or the opener just hums, call (817) 840-7067 and we’ll send a background-checked technician with a written price before any work begins.
Why Lake Worth Homes Are Different
Most of the gate work we do in Lake Worth comes down to two things: expansive clay soil and wind. The clay under this part of North Texas swells after rain and shrinks in drought, which means gate posts heave, shift, and lean. A gate that latched cleanly in August can bind against the post in October. In fact, after a heavy rain, we routinely see gates on the east side of Lake Worth that won’t close because the ground has swollen and moved the posts. The fix is often a re-shim and realignment rather than a full replacement, and a technician who knows the local soil pattern will check that before quoting anything bigger.
Wind is the other constant. Lake Worth sits open to the same gusts that shape the rest of the metro, and a tall steel tube gate catches that wind like a sail. Hardware loosens, hinge pins wear oblong, and gates drift off their track, especially on the older mid-century ranch properties that make up a large share of the housing stock here. Newer subdivisions have their own pattern: long driveways, gate operators wired at the end of a lengthy power run, and control boards that take a beating from summer lightning storms. The heat itself shortens the life of plastic limit-switch housings and capacitor boots inside motors. None of this is exotic. It’s just what Lake Worth does to a gate, and our crews expect it.
Styles & brands we work with
Our Main Lake Worth Services
The three services Lake Worth homeowners and horse-property owners call us about most are below, each with its own page that goes into job specifics, pricing, and what to expect.
Gate Repair in Lake Worth
Most repair calls in Lake Worth start with a gate that drags, binds, or won’t latch. On a working horse property, that’s an urgent call because the gate is the only thing between a horse and the road. Our technicians rebuild sagging frames, re-set posts that have shifted in clay, replace worn hinge pins and hardware, and weld or re-hang gates that have been torqued by wind. We carry common steel tube sizes and hardware for the custom-fabricated gates that are so common on the semi-rural lots here, so a first visit often ends with the gate working, not a parts order. Details on Gate Repair in Lake Worth.
Gate Installation in Lake Worth
New gate installations in Lake Worth have to be planned around the soil and the driveway surface. A post set on a long gravel drive near the lake side of town needs a different footing depth than one set in the rocky patches to the west, and we size the post and the hinge assembly for a gate that will be hit by North Texas wind every single week. We install swing and slide gates, pedestrian gates, and custom-fabricated steel tube gates matched to existing fencing. Every installation starts with a free measure and ends with a written price you approve before we order materials. More on Gate Installation in Lake Worth.
Gate Motor Repair in Lake Worth
When a gate operator fails in Lake Worth, the usual suspects are a control board cooked by a storm surge, a limit switch that’s drifted out of adjustment, or a swing arm that’s fighting a binding gate caused by shifted posts. Our technicians work on the motor brands already installed across Lake Worth, from Linear and Viking swing operators to Ghost Controls and DoorKing slide units, and we trace the fault before recommending a repair or a motor replacement. We also check that the gate itself moves freely, because a motor that’s being asked to push a binding gate will fail again. See Gate Motor Repair in Lake Worth for the full scope.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Lake Worth
Our Lake Worth technicians work on the gate-motor brands already installed around the area, including Linear, Viking, Ghost Controls, and DoorKing. Because we carry common control boards, limit switches, and remotes for these systems in our local service vehicles, a single repair visit usually ends with the motor running rather than a second trip. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Lake Worth, TX
| Service | Typical range in Lake Worth |
|---|---|
| Gate realignment (post shift, re-shim, hinge adjustment) | $140 – $340 |
| Hinge and hardware replacement (steel tube gate) | $190 – $420 |
| Gate frame repair and re-welding | $250 – $650 |
| Standard gate opener repair (control board, limit switch) | $180 – $400 |
| Gate motor replacement (standard swing or slide) | $480 – $1,150 |
| Panel or picket replacement on existing frame | $220 – $520 |
| New driveway gate installation (single swing, steel tube) | $2,200 – $5,500 |
| New custom-fabricated steel tube gate (horse property) | $3,200 – $8,000+ |
Prices in Lake Worth run higher when a gate has been repeatedly patch-repaired, when posts need to be dug out and re-set in clay that’s moved significantly, or when the driveway grade requires a longer custom gate. Every quote is written and delivered before any work starts, so the number you approve is the number you pay.
Neighborhoods We Serve in Lake Worth
We cover the full Lake Worth area, from the semi-rural lots and horse properties near the lake to the established subdivisions closer to the central city. Our typical response window for the Lake Worth area is same-day for most repair calls, with scheduling confirmed when you call.
- Lakeside Estates
- Lake Worth ranchette properties and horse lots
- Marine Creek area
- Central Lake Worth ranch neighborhoods
- Western semi-rural Lake Worth
Service Area – Cities Near Lake Worth
We also serve homeowners across the surrounding metro, and our technicians travel regularly to Fort Worth, TX, Southlake, TX, Bedford, TX, and Burleson, TX. If you’re a few minutes outside Lake Worth, call and we’ll confirm coverage.
Serving Lake Worth, TX - Our Local Coverage Area
We’re based in the Lake Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Lake Worth
Most repair calls in Lake Worth are scheduled same-day, and our phones are answered by a live person 24 hours a day, every day. Call (817) 840-7067 and we’ll give you an arrival window before anyone is dispatched.
It depends on the job. New driveway gate installations that include electrical work for a motor operator often require a permit, while most repairs and motor replacements do not. Our team will check the current Lake Worth requirements for your specific property and tell you before work begins.
Yes. A large share of our Lake Worth work is on manual steel tube gates on ranchettes and horse properties, where the issue is sagging, binding, or shifted posts rather than a motor. We repair and install both powered and manual gates. Call (817) 840-7067 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lake Worth Customers Say
"Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W."Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F."Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H.