Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Bedford, TX
Carver Gate Repair is the gate company Bedford homeowners call when a driveway gate stops working or an old iron gate no longer swings square. Bedford’s housing stock runs older than most of the metroplex, and that means we see a lot of original gates from the 1960s through 1980s that are now failing at the hinge, the post, or the operator. Heat and shifting clay soil do the rest. If you need a gate looked at in Bedford, call (817) 840-7067 and a live person answers, day or night.
Why Bedford Homes Are Different
Bedford was built out during the post-war decades, and many homes still have the original chain-link or wrought-iron driveway gates installed when the house was new. Those gates have now been standing for forty to sixty years. The steel is fatigued. The hinges are worn thin. In a lot of Bedford’s older subdivisions, the gate hinge was welded directly to a steel post set in concrete, and that concrete has shifted over the years. When the post moves, the gate sags, and a simple hinge swap stops being simple. You’re into custom fabrication or resetting the post entirely.
The climate works against gates here, too. Summers in Bedford push metal past 120 degrees on the surface, and the freeze-thaw cycles in winter work water into every joint and seam. We see rust-through at the bottom rail of ornamental gates more often in Bedford than in newer parts of the metroplex. Wind matters as well. Large ornamental gates catch a lot of wind during spring storms, and the stress concentrates at the hinge welds. That’s why we inspect the whole gate when we arrive, not just the part that broke.
Styles & brands we work with
Our Main Bedford Services
Bedford homeowners most often call us for gate repair and gate motor repair, with installation work picking up when an older gate is too far gone to be worth saving. Each service has its own Bedford page below with pricing and specifics.
Gate Repair in Bedford
Most repair calls in Bedford are for gates that won’t close, gates that drag on the ground, or hinges that have torn away from a rusted post. On older properties, the post itself is often the real problem. We’ll tell you plainly whether the gate can be salvaged or whether you’re better off putting the money toward a new gate. Every repair gets a written price before we touch anything, and every repair is covered by a written one-year guarantee. Full details on the Gate Repair in Bedford page.
Gate Installation in Bedford
Installing a new gate in Bedford usually means working around existing concrete that has shifted or cracking posts that were set decades ago. We measure everything on site, order the gate to fit the opening you actually have, and set new posts properly when the old ones aren’t sound. Because a new gate is a measured job, we schedule a free on-site visit and provide a written price, not a same-day dispatch. Details are on the Gate Installation in Bedford page.
Gate Motor Repair in Bedford
Gate motors fail in predictable ways in Bedford’s heat: burnt capacitors, worn limit switches, dead control boards. We work on Ghost Controls, DoorKing, Elite, and Mighty Mule systems, among others, and we carry common parts so many Bedford motor repairs are done in a single visit. The motor gets tested under the full weight of the gate before we leave, not on a bench. Read specifics on the Gate Motor Repair in Bedford page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Bedford
Our technicians carry parts for the major gate-motor brands found in Bedford, including Ghost Controls, DoorKing, Elite, and Mighty Mule. The right board or limit switch in hand usually means the job is done in one visit instead of two. See the full list on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Bedford, TX
| Service | Typical range in Bedford |
|---|---|
| Gate repair service call and diagnosis | $75 – $125 |
| Hinge replacement on an ornamental iron gate | $180 – $400 |
| Post resetting or custom fabrication | $350 – $900 |
| Chain-link gate replacement | $250 – $700 |
| Wrought-iron gate replacement | $800 – $2,500 |
| Gate motor replacement (operator and basic labor) | $700 – $1,500 |
| Control board replacement | $380 – $650 |
| Limit switch replacement | $220 – $380 |
| Loop detector repair or replacement | $300 – $550 |
| Swing arm operator replacement | $600 – $1,200 |
Bedford pricing tends to run higher when an original steel post has shifted and needs to be re-set before a new gate or hinge can go on. Whatever the job, the price is written down and agreed to before any work starts, and the number does not move after that.
Neighborhoods We Serve in Bedford
We work across Bedford, from the older streets near Harwood and Central Drive up to newer subdivisions along Forest Ridge and around Shady Brook. Most Bedford addresses are within a 20-to-30-minute response window for repair calls.
- Harwood Terrace
- Shady Brook
- Forest Ridge
- Bedford Meadows
- Woodland Hills
Service Area – Cities Near Bedford
In addition to Bedford, our technicians serve nearby areas including Southlake, TX, Haltom City, TX, Fort Worth, TX, and Mansfield, TX. Scheduling and dispatch are coordinated from our Dallas-Fort Worth office, with crews stationed to cover Bedford locally.
Serving Bedford, TX - Our Local Coverage Area
We’re based in the Bedford area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Bedford
Most Bedford repair calls are reached within 20 to 30 minutes once the job is booked. We answer the phone around the clock, and if it’s a gate stuck open or a gate that won’t close and secure the property, we treat that as urgent.
Some Bedford neighborhoods with homeowner associations require approval before a gate is replaced or a new motor is installed, particularly if the gate faces the street. Check your HOA’s rules first. A repair on an existing gate that matches what’s already there is rarely an issue.
Yes. The price is written down and agreed to before any work starts on your Bedford gate. The number we quote is the number you pay. If a repair fails within the first year, we return and fix it at no charge, no argument.
If you have a gate problem in Bedford and want a written price and a one-year guarantee, call Carver Gate Repair at (817) 840-7067. A live person answers, 24/7.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Bedford Customers Say
"Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Photo eyes cleaned and aligned. Gate stops for the dog like it should."
- Henry B."Added a battery backup so the gate works during a power outage. Easy to use."
- Mitch L.