Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Richland Hills, TX
Gate repair in Richland Hills, TX is shaped by one thing more than any other: the clay. This small, mostly residential community in the DFW metroplex has expansive soil that swells after spring rain and shrinks through summer, and gates built on that soil shift with it. Carver Gate Repair handles gate repair, gate installation, and gate motor repair across Richland Hills with written prices before any work starts and a full-year guarantee on every repair. Call (817) 840-7067 when a gate stops opening, drags on the ground, or refuses to close.
Why Richland Hills Homes Are Different
Richland Hills is largely a post-war community. Most homes are mid-century ranch and split-level designs from the 1950s through the 1970s, sitting on lots that are bigger than what you’ll find in newer metroplex suburbs. Many of those properties have metal or wood driveway gates, and frankly, a lot of the original steel posts and hinges from that era are still in the ground. They were never meant to survive sixty years of North Texas soil movement.
The local soil is the real variable. Richland Hills sits on clay-rich, expansive ground that swells when wet and contracts when dry. Gate posts set in that soil move seasonally. Technicians working the east side of Richland Hills, where the clay content runs higher, see post shifting and misalignment after heavy spring rains far more often than in neighboring cities with sandier soil. Add hail and high winds from spring and fall storms, and you get a combination that bends panels, knocks sensors out of alignment, and wears out hinges faster than the same gate would hold up somewhere with stable ground. That’s why we emphasize post reinforcement and hardware rated for movement when we work here.
Styles & brands we work with
Our Main Richland Hills Services
These are the three services Richland Hills homeowners call us about most. Each has its own page with pricing, process, and what to expect.
Gate Repair in Richland Hills
Most gate repair calls in Richland Hills start with a gate dragging on the driveway or a post that has visibly leaned after a wet spring. We re-set posts in concrete, replace bent or rusted hinges, straighten frames, and re-align latches so the gate closes square. On properties with original post-war steel posts, we’ll often recommend reinforcing the post base rather than just re-setting it, because the Richland Hills soil will move it again otherwise. Full details are on the Gate Repair in Richland Hills page.
Gate Installation in Richland Hills
A new gate in Richland Hills needs to be planned around the soil, not just the driveway width. We measure the opening, check post depth, and account for the seasonal movement that will happen underneath. For ranch-style lots, we typically recommend steel or aluminum frames with hardware that tolerates some ground shift without jamming. Every installation is quoted in writing before we order material or dig a single hole. See Gate Installation in Richland Hills for the full scope.
Gate Motor Repair in Richland Hills
Gate motors fail in Richland Hills for two usual reasons: power surges from storm season and limit switches that burn out because the gate has been fighting a shifted post or sagging hinge. We service swing and slide operators, replace limit switches, re-set loop detectors, and wire in new control boards. Before replacing a motor, we check what the gate itself is doing, because a slightly misaligned post can kill a new operator within a year. The Gate Motor Repair in Richland Hills page covers brands, diagnostics, and costs.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Richland Hills
We maintain parts stock for the systems most common in Richland Hills: Viking, Ghost Controls, DoorKing, and Elite, among the full lineup we support. Keeping those parts local means less waiting when a control board or limit switch needs replacing. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Richland Hills, TX
| Service | Typical range in Richland Hills |
|---|---|
| Gate repair service call and diagnosis | $79 – $149 |
| Hinge replacement (steel post, includes labor) | $180 – $420 |
| Gate post re-setting in concrete | $350 – $750 |
| Weld repair on steel gate frame | $150 – $380 |
| Gate motor replacement (swing, single arm) | $650 – $1,250 |
| Limit switch replacement | $180 – $320 |
| Loop detector replacement | $250 – $450 |
| Control board replacement | $280 – $600 |
| Remote/keypad programming | $95 – $180 |
| Full gate installation (single swing, steel) | $1,800 – $4,200 |
Prices in Richland Hills run higher when a post has to be dug out and re-set in over-depth concrete to resist the clay movement, or when storm damage has bent the frame enough to require straightening before new hardware goes on. Every price is written down and agreed to before any work starts. The number does not move at the door.
Neighborhoods We Serve in Richland Hills
We work throughout Richland Hills, from the older streets near the center of town to the larger-lot properties along the edges that border North Richland Hills and Haltom City. Typical response time for a Richland Hills gate repair call is same-day or next-day, depending on when you call.
- Richland Hills East
- The Hills
- Central Richland Hills
- Richland Hills West
- Glenview
Service Area – Cities Near Richland Hills
Carver Gate Repair serves Richland Hills and the surrounding DFW areas. Our crews also cover Fort Worth, TX, Southlake, TX, Bedford, TX, and Burleson, TX. If you’re on the edge of Richland Hills and unsure whether your address is in our service area, call and ask; a live person answers.
Serving Richland Hills, TX - Our Local Coverage Area
We’re based in the Richland Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Richland Hills
Most Richland Hills calls are handled same-day or next-day. If a gate is stuck open and the property is unsecured, tell the dispatcher when you call (817) 840-7067 and we’ll prioritize it. A live person answers the phone 24/7, including weekends and holidays.
Most gate repairs and like-for-like replacements don’t require a permit in Richland Hills, but new installations with new footings sometimes do. We’ll check the current local requirements before any installation work begins and handle the paperwork as part of the written quote. Call (817) 840-7067 if you want a straight answer on your specific street.
No. Estimates are free. You get a written price before any work starts, and that number is what you pay. If anything changes once the gate is open or the post is dug out, we stop and get your approval in writing before moving forward. Call (817) 840-7067 to schedule a visit.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Richland Hills Customers Say
"Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W."Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F."Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H.