Automatic Gate Repair in Fort Worth, TX

Automatic Gate Repair in Fort Worth, TX

Automatic gate repair in Fort Worth typically costs between $185 and $485 depending on what’s failed, and most jobs are completed the same day a technician arrives. A gate that won’t open, won’t close, or moves erratically usually points to one of a handful of known issues: a dead motor capacitor, a misaligned safety sensor, a broken limit switch, or a worn gear inside the operator. Carver Gate Repair Fort Worth fixes all of it, with a written price before any work begins and a full-year guarantee on every repair. Call (817) 840-7067 for a free estimate.

We’re the gate repair arm of the Garrison Partners family, and we’ve worked to The Garrison Standard since 2008. That means one thing for homeowners in Fort Worth: you know the price before we turn a wrench, you know who’s walking onto your property, and if the repair doesn’t hold, we come back free inside the guarantee window. No fine print. No moving numbers. The same discipline applies whether we’re replacing a Gate Repair component on a swing arm in Montserrat or diagnosing a slide gate that’s jerking in Mira Vista.

When You Need Automatic Gate Repair

Electric gate repair addresses the predictable ways automatic gates fail. Here’s what homeowners call us about most often around Fort Worth:

• The gate won’t open or close at all. No hum, no movement, nothing. This usually means the operator has lost power, a fuse is blown, or the control board has failed. If you’ve already checked the breaker and the gate still won’t move, the operator itself needs attention.
• The gate moves halfway and reverses. A safety sensor that’s misaligned or a limit switch that’s out of adjustment tells the motor to stop and back off. It’s a protection feature doing its job, but it can’t fix itself.
• The gate opens fine but won’t close. Common with photo-eye sensors blocked by dust, grass clippings, or the afternoon sun angle hitting a west-facing gate. This happens a lot in Fort Worth’s summer months when the sun sits low and hot.
• Grinding, clicking, or humming sounds. A motor that hums but doesn’t turn usually has a bad capacitor or a gear that’s stripped inside the operator. Running it like this makes the damage worse.
• The keypad or remote works intermittently. Sometimes it’s the battery. Sometimes it’s the receiver board. In subdivisions like Bella Flora or Walsh, we also see loop detectors fail under driveways after heavy rain shifts the soil.
• The gate drifts open or closed on its own. This points to a hydraulic leak or a worn valve in the operator, not a ghost. On gates that cycle daily, seals and O-rings don’t last forever.

If any of these sound familiar, a trained technician should look at the system. Automatic gates carry real force, and a misdiagnosed spring or cable under tension can cause serious injury. We frame every visit as a diagnosis first, repair second, and we’ll tell you plainly if the fix is a $20 capacitor or a full operator replacement.

Our Automatic Gate Repair Process

Every Carver Gate Repair Fort Worth visit follows the same sequence. It’s how we’ve kept the work consistent since 2008, and it’s written into The Garrison Code:

1. You call, a person answers. Our phone line at (817) 840-7067 is staffed by a live person, 24 hours a day, 7 days a week, including holidays. We take down what the gate is doing, what equipment you have, and we schedule a window that works.
2. A uniformed, background-checked technician arrives. You’ll know who’s at the gate before they step through it. Every technician is background-checked and uniformed, and their name is on the work order we hand you.
3. We diagnose and hand you a written price. Before any repair starts, you get a written number on paper. Not a verbal ballpark. Not an estimate that grows later. The number on the sheet is the number you pay.
4. We repair the gate. We stock parts for Ghost Controls, DoorKing, and Elite operators on our trucks, so most repairs happen in a single visit. When a part has to be ordered, you’ll know before we leave the driveway.
5. We test and walk through the site. We cycle the gate open and closed under load, check that safety sensors stop the gate when triggered, and confirm the remote and keypad are paired. We leave the site clean and the gate working, or we don’t call the job done.
6. You get the 365-Day Done Right Promise in writing. Every repair carries a written guarantee for a full year. If it fails inside that window, the second visit is free. No charge, no argument, no phone tag.

Automatic Gate Repair Pricing in Fort Worth

How Much Does Gate Repair Cost? (2026 Price Guide) - Fort Worth, TX depends on what’s actually failed, and we’d rather give you a straight range than a fake “starting at” number. Here’s what automatic gate repair work typically runs across Fort Worth:

• Diagnostic visit with written estimate: Free when you proceed with the repair. If you choose not to, it’s a flat $59 service call fee, which covers the technician’s time and the written diagnosis.
• Capacitor replacement: $45 to $95. This little cylinder starts the motor. When it dies, the motor hums but nothing moves. Easy fix, less than an hour.
• Limit switch adjustment or replacement: $120 to $210. This tells the motor where to stop. When it drifts, the gate over-travels and slams or won’t seal shut.
• Safety sensor (photo-eye) repair or replacement: $145 to $260. This is the beam that stops the gate when someone or something crosses its path. Dirt, heat, and wiring issues are the usual culprits.
• Control board replacement: $220 to $440. The board is the brain of the operator. If it’s fried, the whole system stops. We match the board to your operator brand, whether that’s Ghost Controls, DoorKing, or Elite.
• Gear, arm, or actuator repair: $260 to $485. The mechanical parts that physically move the gate. Wear on these is tied to how many cycles the gate runs each day.
• Full operator replacement (motor and board): $680 to $1,450 installed, depending on the brand and whether it’s a slide or swing setup.

What affects the final number? The operator brand and its age, whether parts are in our local stock, and the gate’s size and duty cycle. A heavier gate with more cycles per day wears parts faster. We give you the written price before any work starts, and it doesn’t move at the door. Call (817) 840-7067 for a free estimate on your specific system.

Why Fort Worth Homeowners Call Carver Gate Repair

Most of our calls come from homeowners who’ve already been through the wringer with gate repair companies that no-show, quote one thing and charge another, or send someone who spends half the visit on the phone with their own shop. That’s what The Garrison Standard was built to fix, and it’s what Lonnie Burke runs here in Fort Worth.

Here’s what that looks like on a work order:

• Written price before work starts. The number doesn’t change when the job gets deeper. You approved it in writing, and that’s the contract.
• 365-Day Done Right Promise. The guarantee is in writing on every repair we make. A full year from the date of service. If it fails, the second visit is free.
• Background-checked, uniformed technicians. We tell you who’s coming. They arrive on time, wearing a Carver uniform, and they clean up when they’re done.
• Live-person phone coverage, 24/7. No voicemail boxes, no answering service that takes a message and never returns it. A real person picks up. Weekends. Holidays. 3 a.m.
• We work on nine gate-motor brands. LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We match the part to the system already in the ground, so you’re not paying for workarounds.

For a broader look at what we handle, see our Gate Repair in Fort Worth page, which covers slide gates, swing gates, and full gate installations across the metro.

What We Repair Under Automatic Gate Service

Automatic gate repair covers the moving parts and the brain that drives them. Here’s a plain-English breakdown of the components we see every week in Fort Worth:

The Operator (the motor)

The operator is the motorized box mounted to the gate or its post. It pulls or pushes the gate open. When you hear the hum but the gate doesn’t move, the operator usually has a dead capacitor or a stripped gear. When the whole system is silent, it’s usually the control board. We open the operator, identify the failed part, and replace it before recommending a whole new unit. A new operator only makes sense when the motor, board, and gear train are all worn out.

The Limit Switch

This small switch tells the motor exactly where the gate’s full-open and full-close positions are. When it drifts or fails, the gate slams at the end of its travel or stops short and reopens. It’s a small part that causes big headaches, and we adjust or replace it on most service calls we make in older Fort Worth neighborhoods like Tanglewood and Wedgwood.

The Safety Sensors (Photo-eyes)

At the gate’s base you’ll find two small sensors that face each other. If anything breaks the beam while the gate is moving, the gate stops and reverses. In Fort Worth’s summer heat, these sensors can warp in their housings. In the spring, pollen and dust build up on the lenses. A gate that stops halfway and backs up is usually a sensor telling the motor to stop for a reason. Gate realignment and cleaning them is a fast fix.

The Loop Detector

Many automatic gates in Fort Worth use an induction loop buried in the driveway on the exit side. When a car rolls over it, the loop tells the gate to open. If the loop wire cracks or the detector box goes bad, the gate won’t open automatically as you pull up. We test the loop with a meter before calling it dead, because sometimes the fix is as simple as a sensitivity dial on the detector box.

The Remote and Keypad

When the remote doesn’t work but the manual controls still do, the receiver board inside the operator or the remote itself has failed. We reprogram and re-pair Ghost Controls, DoorKing, Elite, and Mighty Mule remotes on-site, and if the receiver is fried, we replace it in the same visit.

FAQs – Automatic Gate Repair

How much does automatic gate repair cost in Fort Worth?

Most automatic gate repairs in Fort Worth run between $185 and $485. A simple capacitor replacement can be as low as $45, while a full operator replacement can reach $1,450 installed. The only way to know your exact number is to have a technician diagnose the specific failure. Your written price comes before any work starts, so there are no surprises. Call (817) 840-7067 for a free estimate, and we’ll confirm the exact cost for your gate’s make and model.

Can you fix my automatic gate the same day?

In most cases, yes. Our Fort Worth technicians stock common parts for Ghost Controls, DoorKing, Elite, and Mighty Mule operators on the truck, so the majority of repairs are completed in a single visit. If a specific board or gear has to be ordered from the manufacturer, we’ll tell you before we leave so you know the timeline. We schedule windows that respect your day, and we don’t overbook, so a same-day or next-day visit is usually available. Call (817) 840-7067 to check today’s availability.

Is it cheaper to repair or replace an automatic gate operator?

Usually, repair is cheaper. A capacitor, limit switch, or photo-eye replacement costs a fraction of a new operator and extends the life of the system you already have. Replacement makes sense when the motor, board, and gear train are all showing signs of failure at once, which is rare. The honest test is this: if the repair cost is less than 50% of a new operator and the rest of the system is in good shape, repair it. We’ll give you that breakdown in writing and let you make the call without pressure.

Why did my gate stop working after the rain?

Fort Worth’s clay soil shifts after heavy rain, and that movement can crack loop detector wires under the driveway, shift gate posts and hinges, or let moisture into a control box that wasn’t sealed properly. We see a spike in calls after spring storms and after the sudden downpours we get in May and October. Sometimes the fix is resetting a tripped breaker. Sometimes it’s digging up and splicing a broken loop wire. Neither is a job you want to guess at, because a gate that works fine when dry but fails when wet usually has a grounding issue that will only get worse. Call (817) 840-7067 and we’ll trace it to the source.

What Fort Worth Homeowners Should Know Before Hiring

Before you hand your gate to anyone, get three things in writing from them: the price, the guarantee, and their arrival window. If they won’t put the price on paper before starting, walk away. If the guarantee is verbal, it doesn’t exist. And if they give you a four-hour window, they’re booking too many jobs and hoping you’ll be patient.

Carver Gate Repair Fort Worth writes every one of those down on the work order. Lonnie Burke runs this location to The Garrison Standard, and it’s not a marketing line. It’s the operational rule: written price before work starts, background-checked and uniformed technicians on every call, a written guarantee on every repair, good for one full year, and a free second visit if the repair fails inside that window. A live person answers the phone around the clock, every day of the year.

If your automatic gate is acting up, call (817) 840-7067 for a free estimate. We’ll diagnose it, hand you a written price, and if you approve the work, it’s done right and guaranteed for a year. Whether it’s a swing gate in Ridglea Hills, a slide gate in Southlake, or a commercial operator near the Stockyards, the call works the same way.

Written by Lonnie Burke, Owner at Carver Gate Repair Fort Worth, serving Fort Worth.