Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Fort Worth, TX
Carver Gate Repair is the gate company Fort Worth homeowners call when a driveway gate stops opening or a motor burns out after a storm. Fort Worth’s mix of century-old wrought iron, mid-century ranch gates, and new automatic systems across the southwest suburbs means repair work here rarely looks the same from one street to the next. Heat, freeze-thaw cycles, and clay soil movement all take a toll on gate tracks, hinges, and electronics. If your gate will not open or close, call us at (817) 840-7067, and a live person answers.
Why Fort Worth Homes Are Different
Fort Worth’s gate work is shaped by three things: age, weather, and soil. The Fairmount district’s original wrought-iron gates, some over a century old, need welding that preserves the antique profile while restoring structural soundness. Ridglea Hills and the 1960s ranch neighborhoods often have chain-link or simple swing gates mounted on posts that have shifted in the expansive clay. Newer gated communities along Chisholm Trail Parkway run heavier sliding and articulating-arm systems on concrete pads, but those pads crack when the ground moves.
The North Texas climate does the rest. Summer heat pushes gate motors past their thermal limits, winter freezes seize hinges and tracks, and severe thunderstorms trip circuit boards and knock sensors out of alignment. Fort Worth repair work is not seasonal; it is year-round, and the difference between a quick fix and a repeat failure is knowing which components this climate actually breaks.
Styles & brands we work with
Our Main Fort Worth Services
Most Fort Worth calls to us fall into two buckets: a gate that will not work, or a gate that never existed and needs to be built. Below are the three services we run in Fort Worth, each with its own dedicated page.
Gate Repair in Fort Worth
When a swing gate sags, a slide gate jumps its track, or a weld fails on an older iron gate, we send a background-checked technician to diagnose the exact failure before any work begins. In Fort Worth, track misalignment from soil movement is the most common culprit on older properties, while newer sliding gates suffer more from storm-related sensor and limit switch failures. See Gate Repair in Fort Worth for the full breakdown of what gets fixed and what it costs.
Gate Installation in Fort Worth
New construction across Fort Worth, from Chisholm Trail Parkway communities to in-fill lots in established neighborhoods, calls for gates matched to the existing architecture and the power available at the entry. Installation here means accounting for soil type, post depth, and whether the property can support an automatic operator or will run manual. We quote a written price after measuring, never before seeing the site. See Gate Installation in Fort Worth for what a full install includes.
Gate Motor Repair in Fort Worth
Fort Worth’s heat is hard on gate motors, and thunderstorms take out control boards and loop detectors with regularity. We stock parts for Viking, Ghost Controls, DoorKing, and Elite systems so most motor repairs do not wait on shipping from a distributor. A motor that hums but will not move, or trips its breaker, needs a technician who can trace the failure rather than guessing. See Gate Motor Repair in Fort Worth for motor-specific pricing and what the repair includes.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Fort Worth
We work on Viking, Ghost Controls, DoorKing, and Elite gate motors, among others. We keep common boards, limit switches, and remotes for these brands on hand locally, so most Fort Worth motor repairs finish the same day rather than waiting on parts. See our brands for the full list of systems we are trained on.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Fort Worth, TX
| Service | Typical range in Fort Worth |
|---|---|
| Gate repair (minor: hinge, latch, alignment) | $150 – $350 |
| Gate repair (moderate: track, wheel, weld fix) | $300 – $650 |
| Gate motor diagnostics and repair | $180 – $400 |
| Circuit board replacement | $250 – $550 |
| Limit switch replacement | $120 – $250 |
| Loop detector replacement | $200 – $450 |
| Remote and receiver replacement | $90 – $220 |
| Full gate installation (manual) | $1,800 – $4,500 |
| Full gate installation (automatic, operator included) | $3,500 – $9,000+ |
| Gate motor replacement (swing or slide operator) | $800 – $2,200 |
What pushes a Fort Worth job toward the top of these ranges: long runs of concrete track that need re-pouring, older iron gates that require custom welding, and motors that have to be replaced rather than repaired. Every price is written down and agreed to before we start, and it does not move at the door.
Neighborhoods We Serve in Fort Worth
We run calls across the entire city, from the older grid of Fairmount and Ridglea Hills to the newer subdivisions south along Chisholm Trail Parkway and out toward the Tarrant County line.
- Fairmount
- Ridglea Hills
- Arlington Heights
- Wedgwood
- Chisholm Trail Parkway corridor
We usually reach most Fort Worth neighborhoods the same day a call comes in, and we quote an arrival time when the phone is answered, not a vague “sometime between 8 and 6.”
Service Area – Cities Near Fort Worth
Beyond Fort Worth proper, our crews also cover the surrounding Tarrant County suburbs. If your gate is in Haltom City, TX, Bedford, TX, Crowley, TX, or Southlake, TX, the same written price and one-year guarantee apply. Call (817) 840-7067 and we will confirm the address and give you a straight arrival window.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Fort Worth
Most Fort Worth addresses are reached the same day, and you get a specific arrival window when you call (817) 840-7067, not an all-day hold. Severe weather can back up the schedule, but a live person will tell you that when you call rather than sending you to voicemail.
Most gate repairs do not require a permit. New installations, especially automatic gates on new construction, sometimes do depending on the neighborhood and HOA rules. We will tell you before any work starts what your specific property requires, and we do not cut corners on it.
Yes. Many Fort Worth communities, especially newer developments along Chisholm Trail Parkway, have HOA requirements for gate style, height, and automation. We read the HOA spec with you before quoting an installation so the gate you get is the gate you are allowed to have.
If your gate is stuck, calling or sagging in Fort Worth, reach Lonnie Burke and the Carver Gate Repair crew at (817) 840-7067. We quote a written price before work starts, and we stand behind the repair for a full year.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fort Worth Customers Say
"Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Photo eyes cleaned and aligned. Gate stops for the dog like it should."
- Henry B."Added a battery backup so the gate works during a power outage. Easy to use."
- Mitch L.