Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Azle, TX
Carver Gate Repair runs the gate side of things for Azle homeowners who need a written price, a technician who shows up, and a repair that holds up to North Texas weather. Our crew handles gate repair, installation, and motor work across Azle, from the lakeside subdivisions off Liberty School Road to the acreage properties east of town.
What makes Azle different is the ground. The gumbo clay swells and shrinks with every wet-dry cycle, shifting concrete pads and throwing gate tracks out of alignment. We work around that reality every week. If your gate is binding, dragging, or failing to close, call (817) 840-7067 and a live person answers.
Why Azle Homes Are Different
Azle’s housing stock runs from 1970s and 1980s brick and frame ranch houses in established neighborhoods to newer custom builds on acreage near Eagle Mountain Lake. Many of those properties have long driveways and automatic gates, which means the gate opener sits at the far end of a power run, exposed to full sun and the next storm. We see a lot of steel tube and ornamental iron gates on concrete pads that have cracked with soil movement. When the pad shifts, the wheels drag, the track binds, and the motor works harder until something fails.
North Texas summers warp gate frames. Spring storms bring lightning strikes that take out control boards and misalign photo eye sensors. Then a freeze snaps in and brittle wiring cracks. In the lakeside subdivisions off Liberty School Road, we regularly see gate openers fail after heavy rain because the gumbo clay heaves and throws the track out of alignment. The gate that worked fine in November binds up in March. That’s the Azle pattern, and it shapes how we diagnose and what parts we keep stocked for this area.
Some Azle neighborhoods have HOA requirements for gate style and finish, and a few rural properties need a gate that clears a culvert or a drainage swale. We factor those in before the first bolt comes off. Dispatch for Azle is coordinated from the brand’s Dallas-Fort Worth office, and crews serve Azle locally.
Styles & brands we work with
Our Main Azle Services
The two calls we get most from Azle homeowners are a gate that has stopped moving and an opener that has stopped responding. Here is how each one goes, with its own Azle page linked.
Gate Repair in Azle
A sagging gate in Azle is usually the hinge side or the post pulling loose in shifting clay. We square the frame, replace worn hinges and wheels, and re-set posts where the soil has moved. Welded steel tube gates common on Azle acreage respond well to this kind of correction, but the fix has to account for the ground, not just the metal. Every repair is quoted in writing before work starts. The full breakdown is on the Gate Repair in Azle page.
Gate Installation in Azle
New gate installations in Azle start with what the ground will do over the next decade. We set posts deep enough to ride out clay heave, pour pads sloped for drainage, and match the gate to the driveway grade and the HOA rules if there are any. Whether it is a wrought-iron look off a ranch driveway or a steel tube gate on acreage, the job gets measured, ordered, and scheduled with a written price before anything is built. Details are on the Gate Installation in Azle page.
Gate Motor Repair in Azle
When an Azle gate motor stops, the cause is often electrical: a lightning strike on the control board, a limit switch knocked out of position by a wind-shifted gate, or a loop detector that has failed after heavy rain. We test the operator, replace the failed part, and re-set the travel limits so the gate opens and closes fully without slamming. Swing and slide operators both fail in predictable ways around Azle, and we carry parts for the major brands. Full scope is on the Gate Motor Repair in Azle page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Azle
We service and repair gate motors from our brands, including Linear, Viking, and DoorKing, and we keep common boards, limit switches, and remote receivers ready for Azle dispatch. That keeps most motor repairs from waiting on a parts shipment.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Azle, TX
These are the ranges Azle homeowners can expect for common gate jobs. Every price is quoted in writing before any work begins, so the number does not move once the job is open.
| Service | Typical range in Azle |
|---|---|
| Gate repair (hinge, wheel, track, post reset) | $180 – $340 |
| Gate motor repair (board, limit switch, sensor) | $220 – $450 |
| Gate opener replacement | $650 – $1,200 |
| Sliding gate operator replacement | $600 – $1,100 |
| Swing gate operator replacement | $700 – $1,300 |
| New gate installation (steel or iron, standard driveway) | $1,800 – $4,500 |
| Custom gate installation (long driveway, acreage) | $3,500 – $8,000 |
| Control board replacement | $250 – $500 |
| Photo eye sensor replacement | $120 – $220 |
What pushes a job toward the high end in Azle is clay movement under the pad, a long power run from the house to the gate, or a gate that has to be cut and re-welded to fit a shifted post line. The low end usually means the failure is mechanical and isolated. Either way, you get the number in writing before we start, and a written guarantee on every repair, good for a full year.
Neighborhoods We Serve in Azle
We cover Azle and the surrounding service area without a mileage runaround. Most Azle calls get a same-visit diagnosis, with the repair completed on the spot when parts allow. These are some of the areas we work regularly:
- Azle city center and the neighborhoods off Main Street
- The lakeside subdivisions around Eagle Mountain Lake
- The Liberty School Road corridor
- Acreage properties east and southeast toward the county line
- The Briar and Reno areas just outside Azle proper
Service Area – Cities Near Azle
Our Azle crews also serve nearby cities across the northwest side of the metro. That includes Fort Worth, TX, Haltom City, TX, Bedford, TX, and Southlake, TX. If you’re outside Azle proper but in one of those areas, the same written-price standard applies.
Serving Azle, TX - Our Local Coverage Area
We’re based in the Azle area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Azle
Most Azle calls are scheduled the same day or next day, and our phone is answered live 24/7, so you’ll talk to a person the moment you call. We’ll give you a written price before any work starts.
Some Azle neighborhoods have HOA covenants covering gate style, height, and finish. If you’re inside an HOA, we’ll match the gate to those requirements. If we see a covenant issue, we’ll flag it before ordering materials.
Yes. We handle rural properties across the Azle area, including long driveways and gates set back from the road. The truck carries the same parts and equipment, and the written-price rule applies the same as in town. Call (817) 840-7067 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Azle Customers Say
"Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P."Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A."Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W.