Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Haltom City, TX
Gate repair in Haltom City means working with long-span sliding and cantilever gates on Ranch-style lots, where the real adversary is the ground underneath them. The clay soil here swells with spring rain and contracts through August heat, shifting posts and footings enough to throw tracks out of alignment and bind hinges. That’s the job we show up for most weeks. Carver Gate Repair handles it with a written price before any work starts, a background-checked technician on site, and a guarantee in writing on every repair. Call (817) 840-7067 and a live person answers.
Why Haltom City Homes Are Different
Most of Haltom City’s housing stock was built between the 1950s and 1970s: Ranch and Traditional single-family homes on wide lots, many on slab-on-grade foundations. Those lots often have long driveways that needed a gate spanning twelve to twenty feet, which is why sliding and cantilever gates are so common here. A long gate on rolling terrain puts different stress on rollers, tracks, and the operator than a short swing gate on a flat suburban lot.
The soil is the second factor. Expansive clay under Haltom City moves measurably between wet and dry seasons. A concrete gate post poured decades ago without deep piers will tilt a fraction of an inch, and that’s enough to make a latch miss its strike or a chain sag. Along the Denton Highway and Loop 820 corridors, the light-industrial and commercial properties add another layer: heavier gates, more cycles per day, and hardware that has to hold up to real use, not just the family car coming home.
East of Fossil Creek, we still find original builder-grade chain-link gate frames from the 1970s. The galvanized posts are frequently rusted at the base from years of sprinkler overspray. Those posts don’t need replacement in every case. A steel sleeve driven and set at grade restores the post’s load path and lets the existing gate keep working.
Styles & brands we work with
Our Main Haltom City Services
Most Haltom City homeowners reach out for one of two reasons: a gate that won’t open or close properly, or an old gate that has reached the end of its service life. We also run a steady stream of motor-only failures on gates that are otherwise structurally sound.
Gate Repair in Haltom City
Repair work here runs from track realignment on a shifted sliding gate to replacing rusted hinge posts on an older chain-link frame. We start with a written diagnosis and a fixed price, so you know what the job costs before we touch a wrench. If a post has heaved with the clay, we’ll show you exactly what moved and what it takes to correct it. Gate Repair in Haltom City has the full scope.
Gate Installation in Haltom City
A new gate on a Haltom City lot needs to account for the ground it sits on, not just the opening width. We size posts, footings, and track bases for expansive clay, and we’ll tell you plainly if a cantilever design will serve better than a rolling gate on a given site. The written quote includes every line item, so the number does not change after we start. See Gate Installation in Haltom City for what a full install covers.
Gate Motor Repair in Haltom City
When a motor quits on a gate that still swings or slides freely, the fix is usually a failed limit switch, a worn capacitor, or a control board that lost its programming. On long-span Haltom City gates, we also check the operator’s mounting plate and drive chain for stress that builds when the gate binds against a shifted post. Repairing the motor doesn’t fix a misaligned track. We address both. Gate Motor Repair in Haltom City details the common failures we see.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Haltom City
Our technicians run service calls on equipment from DoorKing, Elite, and Ghost Controls among others, so the parts and the know-how match the system already on your property. We stock common control boards, limit switches, and remote receivers for faster turnaround. Full brand coverage is listed under our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Haltom City, TX
What a gate job costs in Haltom City is easier to plan for when you have a range in front of you. Every figure below reflects typical pricing we quote in this market, and every customer gets a written price before any work begins.
| Service | Typical range in Haltom City |
|---|---|
| Gate repair (minor: latch, hinge, roller) | $125 – $300 |
| Gate repair (major: track realignment, post sleeve) | $300 – $600 |
| Chain-link post sleeve reinforcement | $150 – $350 per post |
| Gate motor repair | $180 – $450 |
| Control board replacement | $250 – $700 |
| Limit switch replacement | $120 – $275 |
| Remote/receiver programming | $75 – $175 |
| Gate installation (single swing, standard site) | $1,800 – $4,500 |
| Gate installation (long-span sliding/cantilever) | $4,000 – $12,000 |
| Operator/motor replacement | $800 – $2,200 |
| Service call + diagnosis | $75 – $120, credited toward repair |
Two things push a Haltom City gate job toward the upper end of a range: soil movement that has already compromised a post or footing, and long-span gates that need heavier hardware and more labor to realign. Either way, the number we quote in writing is the number you pay. No estimate that grows once the gate is open.
Neighborhoods We Serve in Haltom City
We run calls across Haltom City’s residential and commercial corridors. Same-day and next-morning windows are standard for most repair work, with emergency response available around the clock.
- Fossil Creek corridor and east-side neighborhoods
- Areas along Denton Highway and Loop 820
- North Haltom City residential streets
- Commercial properties near the rail corridor
- Haltom City proper, including older Ranch subdivisions
Service Area – Cities Near Haltom City
Most of our Haltom City schedule stays inside city limits and its industrial corridors, but the crews also cover a compact radius for homeowners who live just across a boundary line. We serve Fort Worth, TX directly to the south, Bedford, TX to the east, Southlake, TX to the northeast, and Crowley, TX on the southwest side.
Serving Haltom City, TX - Our Local Coverage Area
We’re based in the Haltom City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Haltom City
Most repair calls are scheduled for the same day or the next morning. Our dispatch covers Haltom City from the Dallas-Fort Worth office, with crews routed locally. Call (817) 840-7067 and a live person picks up, including weekends and holidays. No voicemail, no waiting until Monday.
Most repairs and replacements on existing gates don’t require a Haltom City permit. New installations, particularly large sliding or cantilever gates with deep footings, may fall under building permit review depending on setbacks and property line. We’ll flag it during the estimate if your job needs one.
Every repair carries a written guarantee covering workmanship and parts for a full year. If the same repair fails inside that window, the second visit is free. The guarantee is printed on your invoice, not promised over the phone. It applies to every service call we run in Haltom City.
For a free estimate, call (817) 840-7067 and ask for Lonnie Burke. You’ll get a straight answer, a written price, and a live person on the other end of the line.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Haltom City Customers Say
"Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A."Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W."Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F.