Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Haltom City
Gate installation in Haltom City runs $1,400 to $5,600 for most residential projects, with electric gate automation adding $900 to $2,200 depending on the operator and access controls. We’re Carver Gate Repair Fort Worth, and we dispatch background-checked, uniformed technicians to Haltom City neighborhoods along Denton Highway, Loop 820, and the Fossil Creek corridor every week. You get a written price before any work starts, and every installation carries the 365-Day Done Right Promise. Call (817) 840-7067 and a live person answers, day or night.
Why Carver Gate Repair Fort Worth Is Haltom City’s Preferred Gate Installation Company
Haltom City homeowners call us after the gate guy doesn’t show, or the quote grows once the work is open. That’s the exact problem The Garrison Standard was built to solve. Since 2008, every Carver location has operated on the same non-negotiables: a written price before work begins, background-checked technicians in uniform, and a 365-day guarantee in writing. Lonnie Burke runs our Fort Worth operation, and he holds every job to that standard.
The reviews from Haltom City customers point to the same things: the crew showed up when they said they would, the price didn’t move, and the site was clean when they left. We carry parts for the operators already installed throughout Haltom City, so we’re not making a second trip across Fort Worth because a limit switch wasn’t on the truck. Our response time to Haltom City is typically same-day or next-day for repairs, and installation scheduling is set around your availability, not ours.
Local knowledge matters here. The clay soil under Haltom City moves. A footing poured too shallow heaves after a February freeze and the gate never lines up again. We plan for that from day one.
Styles & brands we work with
Gate Installation Services in Haltom City
Gate Installation Services in Haltom City mean more than hanging a panel on hinges. The local housing stock, mostly 1950s through 1970s Ranch and Traditional homes on large lots, often has garage-to-backyard access that never had a proper gate, or a builder-grade chain-link frame that’s been rusting since the Carter administration. A correct installation here starts with the post footings. Haltom City’s expansive clay swells in wet springs and contracts in August. A footing poured to the right depth with proper rebar keeps the gate plumb through every freeze-thaw cycle.
Most new installations in Haltom City run $1,400 to $3,800 for a standard single swing gate, and $2,800 to $5,600 for a long-span sliding gate or double gate. That includes the gate fabrication or panel, posts set in concrete, hinges, latch, and labor. You’ll see the full written price before we dig the first hole.
Driveway Gate Installation
Driveway gate installation in Haltom City usually means a slide or swing configuration, depending on the setback from the street. Many homes east of Denton Highway have long driveways that slope slightly toward the street, so drainage and gate clearance both shape the design. We measure the opening, check the grade, and build for the gate to clear even when the clay swells.
Pedestrian Gate Installation
Pedestrian gates on Haltom City’s Ranch-style lots often run alongside the driveway or between the garage and backyard. If you’re replacing a chain-link fence gate with a steel frame gate, we’ll match the existing fence height and set the post so the latch doesn’t bind when the ground moves. These jobs typically start around $900.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Electric Gate Installation in Haltom City
Electric Gate Installation in Haltom City pairs the gate with an operator, access controls, and the power run that should have gone in during the build but usually did not. Most of the homes here were built before anyone thought about automating a driveway gate, so trenching and conduit are part of the conversation. A typical electric gate installation with automation runs $2,300 to $5,600, depending on the operator class and whether you want keypad entry, remote controls, or a vehicle loop detector.
We install and service operators from Ghost Controls, DoorKing, Elite, and Mighty Mule. The right pick depends on gate weight, cycle frequency, and whether the gate is near light-industrial traffic along Loop 820, where loops and safety photocells become non-negotiable.
Sliding Gate Automation
Sliding gates are common in Haltom City because they fit narrow side yards and don’t swing into the driveway or the street. Automation on a slide gate usually means a rack and pinion drive mounted to the gate frame. If your existing sliding gate was manual, we’ll check the track, the rollers, and the post alignment before adding the operator. A gate that already binds in the clay will destroy a new motor.
Security Gate Installation
Security gate installation on Haltom City’s industrial and commercial properties along Denton Highway often includes higher-cycle operators, vehicle loop detectors, and keypad or card access. The gate has to hold up to delivery trucks and employee traffic, which means heavier posts, heavier hinges, and an operator rated for the duty cycle. We spec those jobs carefully because a residential-grade operator on a commercial gate fails in months.
Trusted Brands We Service in Haltom City
We’re factory-trained on the operators you likely already have or are considering for your Haltom City property: Ghost Controls, DoorKing, Elite, and Mighty Mule. We stock the common limit switches, control boards, and remote transmitters for these brands on our trucks, which means fewer return visits and faster turnarounds for Haltom City customers. When a DoorKing board fails on a gate off Loop 820, you don’t want to wait a week for a part to ship. We carry it.
Common Gate Installation Problems We See in Haltom City Homes
- Builder-grade operators on long-span slide gates near Loop 820. Delivery trucks hit these gates or trip them constantly, and the operator burns out trying to move a gate that’s binding on a rusted track. We replace the operator and add a vehicle loop detector so the gate opens before the truck reaches it.
- Post footings poured shallow in expansive clay. Haltom City’s clay swells and shrinks through every wet-dry cycle. A shallow footing heaves in winter and the hinge post tips, so the swing gate binds on the latch side. We dig footings below the frost and active soil line, with proper rebar.
- Manual gates converted to automation without upsizing the hinge post. Adding an operator to a gate that was never framed for it twists the top rail and trips the safety photocell. We check the frame and add sag correction before mounting the operator.
- Rusted galvanized posts from sprinkler overspray. In Haltom City’s older neighborhoods, sprinklers have been hitting the gate posts for forty years. The base rusts through. A sleeve reinforcement can save the post instead of pouring new footings.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Installation in Haltom City, TX
You should know what this costs before you pick up the phone. Here are the honest ranges for Haltom City:
- Pedestrian gate installation: $900 – $1,800
- Single swing driveway gate: $1,400 – $3,800
- Double swing gate: $2,800 – $5,600
- Long-span sliding gate: $2,500 – $5,200
- Electric gate automation added to an existing gate: $900 – $2,200
- Full electric gate installation with operator and keypad: $2,300 – $5,600
What moves the price is gate width, operator class, trenching distance for power, and whether we’re replacing or reinforcing existing posts. The price we quote is the price you pay. It’s written down before any work starts, and it doesn’t move at the door. Call (817) 840-7067 for a free estimate on your specific gate.
We Also Serve Cities Near Haltom City
Our crews cover Haltom City and the surrounding North Texas communities. If you’re in Fort Worth, Bedford, Southlake, or Crowley, you get the same written-price guarantee and the same background-checked technicians. Learn more about our Gate Installation services across the metro, or read about Gate Installation in Haltom City for full local details.
A Note on Haltom City’s Clay Soil and Gate Footings
If you live on a Ranch-style lot east of Denton Highway, you already know the soil moves. The black clay swells in March, cracks open in July, and heaves after a hard freeze. That movement is the single biggest reason gates fail in Haltom City. A concrete footing poured 18 inches deep acts like a shallow anchor in a storm. We pour footings below the active soil line and set posts with rebar so the gate stays plumb through the entire cycle. It’s not a small detail. It’s the difference between a gate that works for twenty years and one that binds after the first wet spring.
Haltom City’s eastside Fossil Creek corridor still has many original 1970s builder-grade chain-link gates with galvanized posts rusted at the base from decades of sprinkler overspray. When we install a new gate in these neighborhoods, we often sleeve-reinforce the existing posts rather than rip them out and pour fresh footings. It’s faster, it’s stronger, and it saves you the cost of demolition. Not every Haltom City property needs this, but if your posts show rust at the base, we’ll check them first.
On a cul-de-sac off Denton Highway, our crew replaced a builder-grade LiftMaster operator on a long-span sliding gate that had been fighting the clay soil’s freeze-thaw shift. We poured a new footing for the hinge post, added a rack and pinion drive, and wired in a safety photocell and keypad entry. Then we watched the gate glide instead of grind. That’s what a correct installation in Haltom City looks like.
Serving Haltom City, TX - Our Local Coverage Area
We’re based in the Haltom City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Haltom City
Yes, in most cases. Haltom City’s expansive clay means existing footings were often poured too shallow for the extra weight and force of an automated operator. We inspect the post depth and plumb before mounting any operator. If the post is rusted at the base or out of plumb, we’ll sleeve-reinforce or replace it. Call (817) 840-7067 and we’ll check it during the free estimate.
Replace it. Builder-grade LiftMaster operators are rated for residential use, and a long-span sliding gate near Loop 820 sees heavy traffic and repeated cycles. The motor burns out because it’s undersized for the gate and the duty cycle. We’ll spec a heavier operator from Ghost Controls or DoorKing, add a vehicle loop detector, and the problem stops. The written price covers everything before work starts.
Yes, if the frame and posts are sound. Many Haltom City gates were installed as manual gates decades ago. We check the hinge post size, top rail sag, and gate weight before adding an operator. If the frame twists, we add sag correction or reinforce the post. Then we mount the operator, wire the power run, and set up your remotes and keypad. The job is quoted upfront and done right.
Your clay soil contracted during the dry summer, and the post moved. Haltom City’s expansive clay shrinks when it’s dry and swells when it rains, which tips the hinge post out of plumb. The gate then binds on the latch side. This is the most common gate failure we see in Haltom City’s Ranch-style neighborhoods. The fix is resetting or reinforcing the post, not just adjusting the hinges. Call us and we’ll tell you exactly what your gate needs.
Yes, if the gate opens onto a street or driveway with regular traffic. A loop detector senses a vehicle approaching and opens the gate before the driver reaches it. Without one, a solar opener on a Haltom City driveway gets tripped by delivery trucks or family cars and the motor cycles constantly, draining the battery. We install loop detectors with solar operators on most residential driveway gates here.
Call Carver Gate Repair Fort Worth for Gate Installation in Haltom City
You want a gate that works, a price that doesn’t move, and a crew that shows up. That’s the job. Call (817) 840-7067 for a free estimate on gate installation in Haltom City. A live person answers, we schedule around your day, and the price is in writing before any work begins.
Written by Lonnie Burke, Owner at Carver Gate Repair Fort Worth, serving Haltom City under The Garrison Standard since 2008.