Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Bedford
Gate installation in Bedford, TX typically runs $2,100 – $6,800 for a standard single swing or sliding driveway gate, and $7,500 – $18,000 for a custom fabricated ornamental gate with operator, safety edges, and access control. Most installations are completed within one to two days once materials and operators are on site. We answer our phone live at (817) 840-7067 around the clock, and every job starts with a written price before any work begins.
Bedford is not a city where you can hang a generic gate off a box-store kit and expect it to hold up. Our crews work in the older subdivisions along Harwood Road, Forest Ridge Drive, and the neighborhoods east of Central Drive, where driveway gates were often welded directly to steel posts set in concrete forty or fifty years ago. That kind of installation demands fabrication work, not just a new operator bolted to a fresh post. If you live in or near the 76021 or 76022 zip codes, we can have a background-checked technician at your property with a written quote, usually within the same day.
Why Carver Gate Repair Fort Worth Is Bedford’s Preferred Gate Installation Company
Bedford homeowners call us because we are disciplined about three things: we show up when we say we will, we hand over a written price before touching the gate, and the repair carries a 365-Day Done Right Promise in writing. Every technician who rolls into a Bedford driveway is background-checked, uniformed, and trained on nine gate-motor brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If a repair we make fails inside one year, the second visit is free. No argument, no re-quote.
Lonnie Burke runs our gate installation and fabrication work across the Dallas-Fort Worth metro, including Bedford. The crews he sends know the difference between a 1970s ornamental iron gate that can be realigned and one that has rusted past saving. That judgement matters in Bedford, where a lot of the original gates on 1960s- and 1970s-built homes are still standing. We do not push replacement when a correct fabrication fix costs less and lasts longer. That is the Garrison Standard, and it has governed how this company has operated since 2008.
Styles & brands we work with
Gate Opener Installation in Bedford
Gate opener installation in Bedford involves mounting and programming a swing, slide, or articulated-arm operator, running power or configuring solar, and wiring safety photocells and loop detectors so the gate stops and reverses when it should. In Bedford’s older neighborhoods, this work often requires reinforcing an existing post or building a new pad before the operator can be mounted level and square.
Operators sized for heavy gates
A chain-driven slide operator from DoorKing or a hydraulic swing operator from FAAC is not an interchangeable part. We calculate gate weight, panel length, wind exposure, and cycle count before recommending a unit. A heavy ornamental gate on Harwood Road catches more wind than a light chain-link gate in a protected courtyard, and the operator has to be sized accordingly.
Typical operator installation in Bedford runs $1,650 – $3,900 including the unit, mounting, safety devices, and programming. If the job also requires a new concrete pad or post reinforcement, expect to add $400 – $1,200.
Retrofit safety on older systems
Original gates in Bedford’s established subdivisions frequently lack photocells and reversing edges. Retrofitting entrapment protection onto a 1980s swing gate is not optional under current safety standards, and we wire every installation with monitored photocells and a reversing loop detector. This also prevents the operator from overloading when a car idles on the loop.
Gate Fabrication in Bedford
Gate fabrication in Bedford is the difference between buying a gate and having one built to fit the existing posts, setbacks, and driveway slope. We fabricate steel and aluminum gates in standard and custom dimensions, then powder-coat or prime and paint to match the existing fence and house trim. That matters in Bedford, where many driveways have non-standard widths and the old posts were not set plumb to begin with.
Custom ornamental and privacy gates
For homeowners along Bedford’s older tree-lined streets, we match the original gate’s profile and picket spacing when building a replacement, so a new driveway gate does not look like an afterthought next to a 1970s wrought-iron fence. Custom ornamental fabrication in Bedford typically runs $3,800 – $9,500 depending on size, material, and finish.
Replacing posts and footings
We pour new footings below the frost line, set posts in place with temporary bracing, and weld or bolt the new gate to exact alignment. When a post has shifted, simply re-hanging the old gate guarantees it will sag again. Expect post replacement and footing work in Bedford to add $600 – $2,200 per post, depending on access and concrete removal.
Trusted Brands We Service in Bedford
We install and service operators from Ghost Controls, DoorKing, Elite, and Mighty Mule in Bedford, and we keep common control boards, limit switches, and remote transmitters on our trucks. That means less waiting on a freight delivery when a Bedford gate goes down on a Friday afternoon. We also stock parts for LiftMaster, FAAC, BFT, Linear, and Viking, so the right component is usually a dispatch away, not a week away. If your existing gate uses one of those manufacturers, our technician will arrive knowing how it is wired, how it fails, and what replacement part it needs.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Installation Problems We See in Bedford Homes
- Shifted concrete posts: Bedford’s freeze-thaw cycles heave old concrete footings, and after forty or fifty years the post drifts out of plumb. Re-hanging a gate on a crooked post only transfers the stress to the hinges and the operator. The fix is cutting out the post, pouring a new footing, and realigning before the gate goes back on.
- Rust-through on ornamental iron: Intense summer heat followed by winter moisture accelerates rust on unpainted or undercoated iron gates in Bedford. We regularly find hinge barrels corroded to the point of seizing. Repair means cutting out the rusted section, fabricating a replacement, and coating the joint inside and out.
- Undersized operators on heavy gates: Many Bedford homeowners inherit a 1990s operator that was never rated for a solid steel gate. The motor burns out, or the board fails, or the gear strips. We replace it with a correctly sized unit and add soft-start settings so the gate does not slam.
- Missing safety photocells: Gates installed before the mid-1990s often have no entrapment protection. Adding photocells and a reversing loop detector to an old Bedford driveway gate is one of the most common upgrades we make during an installation or rebuild.
Pricing for Gate Installation in Bedford, TX
A standard single swing steel driveway gate with operator, two remote transmitters, keypad, and safety edges in Bedford runs $3,200 – $6,500 installed. A double swing gate on a wider driveway runs $5,500 – $9,800. Custom ornamental fabrication with a hydraulic operator and intercom integration runs $8,500 – $18,000, depending on the level of detail and access control requested.
What changes the number in Bedford is usually the condition of the existing posts and underground infrastructure. If we can reuse the current posts and only replace the gate and operator, the cost stays at the lower end. If we are pulling rotted posts, pouring new footings, and running conduit for a new operator, expect the upper end. We provide a written quote for the complete job before work starts, and that number does not move at the door.
We Also Serve Cities Near Bedford
Our Gate Installation crews cover the surrounding Tarrant County area, including Southlake, Haltom City, Fort Worth, and Mansfield. If you are in one of those communities and need a gate built, repaired, or automated, the same written-price policy and 365-day guarantee apply. Call (817) 840-7067 and a live person will schedule your estimate.
Serving Bedford, TX - Our Local Coverage Area
We’re based in the Bedford area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Bedford
Yes. We cut the old hinge post out of its footing, pour a new reinforced footing, and fabricate a replacement post with the hinge barrel positioned for exact alignment. The original driveway approach and most of the fence line remain untouched. In most Bedford cases, we can save the original gate panel if the rust damage is limited to the post and hinge.
For a heavy custom gate in Bedford, a hydraulic or high-torque articulated-arm operator from FAAC, BFT, or DoorKing is usually the right call, sized against the actual panel weight and wind load. Yes, entrapment protection with monitored photocells and a reversing loop detector is required on any newly automated gate. We wire both into every Bedford installation and test them before we leave.
A new operator will not fix a sagging gate. The drag will burn out the new motor the same way it has been straining the old one. In Bedford, the usual sequence is: expose the post base, verify the footing, cut and replace the post, re-hang the gate, then install the operator once the gate swings freely. We quote this as one job with one written price so the order of operations is clear up front.
Yes, and Bedford has plenty of these. We install solar-capable operators from Ghost Controls and Mighty Mule with panel mounts sized to the gate’s daily cycle count. If the gate has to open more than eight or ten times a day, we recommend a hardwired run instead, because a battery that is not recharging will leave the gate dead by midwinter. Either way, the written quote includes the full power plan before work starts.
We recommend a twice-yearly inspection in Bedford: once before summer heat, once after the first freeze. The technician checks hinge welds, post plumb, rust bloom, safety photocell alignment, and operator limit switches. On Bedford’s ornamental iron gates, we touch up scratches and welds with a matched coating to keep moisture out of the joints. This is the single most effective way to avoid a post or hinge failure five or ten years down the road.
If you need a new gate installed, an old one rebuilt, or an operator matched to a heavy existing gate in Bedford, call (817) 840-7067 for a free written estimate. We answer live, 24 hours a day, at that number, and we will have a technician at your Bedford property with a price before any work starts.
Written by Lonnie Burke, Owner at Carver Gate Repair Fort Worth, serving Bedford since opening Dallas-Fort Worth operations under the Garrison Standard.