Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Benbrook
Gate installation in Benbrook runs $2,400 to $9,800 for most residential jobs. A standard single swing gate with an operator lands in the $3,200 to $5,500 range, while a 20-foot sliding gate built for equestrian access and high-wind conditions on acreage usually falls between $6,500 and $9,800. Our crews know Benbrook’s clay soil, its wind patterns off Benbrook Lake, and the wide ranch-style entrances that dominate Timber Creek and Westpark. Call (817) 840-7067 and you’ll get a live person, a written price before any work starts, and a full-year guarantee on the installation.
We’re not a general contractor that happens to hang a gate now and then. Carver Gate Repair Fort Worth works exclusively on gates and their operators, across nine major brands, under the Garrison Standard: background-checked technicians, a written price before work begins, and a 365-day Done Right Promise. When you call, you get a person, not a voicemail box. Every day. Including weekends and holidays.
Why Carver Gate Repair Fort Worth Is Benbrook’s Preferred Gate Installation Company
Benbrook homeowners call us after they’ve been burned: a quote that grew at the door, a technician who didn’t show, or a gate that failed within months. The Garrison Standard exists because that’s exactly the market we serve. Every price we give is written down before work starts. Every installation carries a written guarantee, good for a full year. If the gate or operator fails inside that window, we come back and fix it free. No charge, no argument.
Lonnie Burke leads our Fort Worth operation. Our technicians show up in uniform, background-checked, driving marked vehicles. They know the difference between a 1970s ornamental iron gate on the east side of Benbrook and a newer decorative steel gate in Bella Flora, because the installation approach is not the same. Older posts need inspection; newer installs need wind-load calculation. We do both.
Dispatch and scheduling for Benbrook are coordinated from our Dallas-Fort Worth office, which means the parts truck that arrives at your driveway can carry DoorKing, Elite, and Mighty Mule components on the same day. That matters when you’re getting a quote and the job can’t wait for a special order.
Styles & brands we work with
Driveway Gate Installation in Benbrook
Driveway gate installation in Benbrook typically requires heavier operators and deeper footings than a standard suburban install in Fort Worth or Burleson. That’s because many Benbrook driveways open onto acreage. A 20-foot entrance built for horse trailers and ranch access puts a structural load on the hinge post that a 12-foot city gate never does. We price driveway gate installation in Benbrook from $3,200 to $9,800, depending on gate width, post replacement, and operator horsepower.
Wide Ranch Entrances and Trailer Access
A gate that has to clear a loaded horse trailer needs an operator rated for the gate’s full weight at its widest point, not just the panel weight on paper. We spec operators with enough torque to start a 600-pound gate against a north wind. We also set loop detectors at trailer height, not car height, so the gate holds open until the trailer has cleared the sensor field.
Post Footings and Wind Load
Benbrook’s heavy clay soil expands and contracts with moisture. A hinge post set in a shallow pad will heave within a few seasons, and once the post moves, the gate drags and the operator burns out its capacitor. We dig footings to four feet below grade where local wind-load standards and soil conditions call for it, then pour concrete piers that hold the post through Benbrook’s spring storm cycles.
Sliding Gate Installation in Benbrook
Sliding gate installation in Benbrook is usually the right answer when the driveway has slope, when a swing gate would block the street or ditch line, or when the entrance needs a 20-foot clear opening for trucks and trailers. We install sliding gates across Benbrook from $4,800 to $9,800, with the operator, track or cantilever system, safety photocells, and wiring included in the written quote.
Cantilever Systems for Clay Soil
On Benbrook’s clay, a track-mounted sliding gate can bind as the ground shifts. We recommend a cantilever slide system on larger ranch entrances. The gate rides on rollers suspended above the ground, so it never drags through standing water or shifting soil. This is a common fix for driveways along Mary’s Creek and the Trinity River bottom, where seasonal saturation moves the ground enough to seize a track.
Operators, Rack and Pinion, and Safety Edges
We build sliding gate operators with rack and pinion drive matched to the gate’s travel weight. Every Benbrook sliding gate install includes safety photocells and a reversing edge. If the gate hits something, it stops and reverses. On equestrian properties, we also set the travel limits wide enough that a trailer never clips the gate mid-travel.
Trusted Brands We Service in Benbrook
We work on nine gate motor brands, so when a Benbrook homeowner calls about an operator, we match the right parts to the system already installed. That includes Ghost Controls, DoorKing, Elite, and Mighty Mule. We stock common boards, limit switches, loop detectors, and remote receivers for these brands, which means a repair or a new install on a Saturday doesn’t wait on a parts shipment from California. If your gate has an operator we don’t recognize, we’ll tell you straight whether it’s worth fixing or replacing.
Common Gate Installation Problems We See in Benbrook Homes
- Hinge posts heaving out of the ground. Benbrook’s clay soil expands and contracts with moisture. A post set in a shallow concrete pad gets pulled out of plumb, the gate drags, and the operator’s capacitor burns out inside a season. We reset posts with deep concrete piers.
- Undersized operators on wide equestrian entrances. A 20-foot gate with a loaded horse trailer crossing the loop detector stalls a light-duty swing operator. The rack and pinion strips, and the gate is stuck half-open. We spec operator horsepower for the full loaded weight, not the panel alone.
- Corroded low-voltage wiring near creeks and flood zones. Gates along Mary’s Creek and the Trinity River bottom often lose their wiring after floods. Water wicks up into the conduit and corrodes connections long after the ground dries. We replace with sealed, gel-filled splices and, where needed, re-route the conduit above the flood line.
- Solar panels sized too small for spring weather. Solar gate openers with undersized panels and no low-voltage cutoff die during Benbrook’s overcast spring storms. The gate goes dead mid-travel for days. We spec panels with enough wattage to hold a charge through a week of clouds, plus a battery bank with a low-voltage disconnect.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Installation in Benbrook, TX
Here are the numbers we quote in Benbrook, in writing, before any work starts. A single driveway swing gate with a basic operator: $3,200 to $5,500. A 20-foot sliding gate for an equestrian entrance or wide driveway: $6,500 to $9,800. A full double swing gate setup with two operators: $5,800 to $9,500. Post replacement, deep footing work, solar power, and long conduit runs add cost. The price you sign is the price you pay. Call (817) 840-7067 for a free written estimate, and we’ll come measure the entrance and give you the exact number to your face.
We Also Serve Cities Near Benbrook
Our Gate Installation crews cover Benbrook and the surrounding area, including Fort Worth, Southlake, Bedford, and Burleson. If you’re near Benbrook but outside the city limits, call and ask. We’ll tell you plainly whether we can get a truck to you this week. For Benbrook-specific service, see Gate Installation in Benbrook.
Serving Benbrook, TX - Our Local Coverage Area
We’re based in the Benbrook area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Benbrook
You need an operator rated for at least the gate’s full loaded weight at its widest point, typically 1/2 to 1 horsepower for a 20-foot gate on flat ground, and more if the gate is solid steel or the driveway slopes. On Benbrook acreage, we spec operators with enough starting torque to move a 600-pound gate against a north wind, and we set loop detectors at trailer height so the gate holds open while the trailer clears. Call (817) 840-7067 and we’ll size it from the gate’s measurements, not a chart.
Because Benbrook’s floodwater wicks up into the conduit and sits there long after the ground looks dry. The water corrodes the low-voltage connections, and the gate stops reading the keypad or the loop detector. We replace with sealed, gel-filled splices and re-route the conduit above the flood line where the grade allows.
Yes, and in many Benbrook ranch entrances, solar is the cheaper route than trenching 400 feet of conduit. The catch is panel sizing. Benbrook’s overcast spring storms can leave an undersized panel dead for days. We spec a panel with enough wattage to hold a charge through a week of clouds, paired with a battery bank and a low-voltage cutoff so the gate never strands you mid-travel. Call
Benbrook’s hard water and clay soil hold moisture at the base of the hinge post, and the original iron gates from that era were rarely sealed on the bottom rail. Water pools at the hinge, rust works upward, and the gate starts to sag. When we install a new gate on one of these east-side properties, we specify galvanized steel or aluminum and set the post in a concrete pier that breaks contact with the clay. Call (817) 840-7067 for a look before the hinge tears out.
Yes. A keypad opens the gate, but a loop detector is what keeps it from closing on your truck, your trailer, or your kid’s bike. On Benbrook sliding gates, especially 20-foot ranch entrances, we install a safety loop at the exit side and an entry loop at the approach side, so the gate holds open when anything metal is in the zone. It’s not an upsell. It’s the difference between a gate that works and a gate that hurts someone. Call (817) 840-7067 for a written quote.
Contact Carver Gate Repair Fort Worth for Benbrook Gate Installation
If you’re in Benbrook and you need a gate installed correctly, call (817) 840-7067. You’ll get a live person, a free written estimate, and a straight answer about what your entrance needs. We serve Benbrook with background-checked technicians, a written guarantee on every installation, and the Garrison Standard on every job.
Written by Lonnie Burke, Owner at Carver Gate Repair Fort Worth, serving Benbrook and the surrounding area.
Why Benbrook Chooses Carver Gate Repair Fort Worth
We set the standard for gate installation in Benbrook.
30-60 Min Response
Fast dispatch across Benbrook. Same-day and after-hours emergency service available.
Licensed & Insured
Fully certified technicians who meet all local and state licensing requirements.
Upfront Pricing
No hidden fees, no surprises. You approve the price before any work begins.
Guaranteed Work
Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.
How It Works in Benbrook
Getting your gate installation handled is simple and fast.
Call or Request a Free Estimate
Tell us about your gate installation needs and we provide an upfront, transparent quote - no obligation, no hidden fees.
Licensed Technician Dispatched
A background-checked, certified technician arrives in Benbrook - typically within 30-60 minutes, with parts stocked on the truck.
Problem Solved, Guaranteed
We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate installation pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Benbrook Customers Say
Trusted by homeowners across Benbrook and surrounding areas.
"Photo eyes cleaned and aligned. Gate stops for the dog like it should."
"Added a battery backup so the gate works during a power outage. Easy to use."
"Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
Our Work in Benbrook
A look at recent gate repair projects across Benbrook and surrounding areas.
Ready for Gate Installation in Benbrook?
Call now for a free estimate - or request one below. Licensed, insured, and here with fast after-hours help in Benbrook.
(817) 840-7067Request a Free Estimate in Benbrook
Tell us about your gate installation needs - we'll respond within the hour.