Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Crowley
Gate installation in Crowley, TX typically runs $1,850 to $6,400 depending on the gate type, size, and whether you’re adding an opener system. Most Crowley homeowners get a written quote within 48 hours of the first call, and scheduled installation happens within one to two weeks. Carver Gate Repair Fort Worth serves every Crowley subdivision, from Oak Grove to Summer Creek Ranch, with background-checked technicians who show up on time and leave the site clean. Call (817) 840-7067 for a free estimate, and you’ll get a written price before any work starts.
Crowley’s newer housing stock sits on expansive clay soil, and that changes how gates need to be installed here. We dig footings deeper than code minimums, use heavier strap hinges on wooden gates, and spec wind-rated hardware on every solid infill panel. The goal is a gate that swings or slides true through years of North Texas storms, not just through the first season.
Key Takeaways
- Full gate installations in Crowley generally cost $1,850 to $6,400, with gate openers adding $900 to $2,400.
- Clay soil and high winds mean Crowley gates need deeper footings and wind-rated hardware.
- We install sliding gates, swing gates, double gates, and pedestrian gates with written pricing before work begins.
- Every installation carries the 365-Day Done Right Promise through The Garrison Standard.
Why Carver Gate Repair Fort Worth Is Crowley’s Preferred Gate Installation Company
Crowley homeowners call us because they’ve already been through the other kind of experience. The crew that quotes one number, shows up late, and leaves a crooked gate bolted to a wobbling post. We run every job through The Garrison Standard: written price first, uniformed technicians on site, and a written guarantee on every installation. The 365-Day Done Right Promise means if the gate isn’t right, we come back and make it right at no charge. That’s not an upsell; it’s the operating standard since 2008.
Our crews know the Crowley market specifically. We work on gates installed by production builders in Deer Creek, Hulen Bend, and the subdivisions along FM 1187, most of which were built in the last 20 years. The common problems here are sagging wooden swing gates, sliding gates that bind after heavy rain, and operators that fail during summer heat. Because we’re local to the Dallas-Fort Worth corridor, response time to any Crowley address is typically within a few hours for estimates, and scheduled installations are booked within a week or two.
Lonnie Burke leads the Carver Gate Repair Fort Worth team, and calls are answered by a live person 24 hours a day, seven days a week. You won’t get a voicemail box or a call-back queue. When you call (817) 840-7067, a person picks up.
Styles & brands we work with
Sliding Gate Installation in Crowley
Sliding gate installation in Crowley is the right choice for driveways with limited swing clearance, sloped approaches, or wide openings that would put too much stress on hinge posts. A cantilever slide gate rides on rollers without touching the ground, while a rolling slide gate runs on a track that has to be kept clear of debris. In Crowley, where clay soil shifts with seasonal moisture, we favor cantilever designs because they don’t depend on a ground track staying perfectly level. Typical cost for a steel sliding gate in Crowley runs $2,400 to $5,800, depending on width and whether you’re adding an opener.
Footing requirements on clay soil
Clay doesn’t drain well, and it swells when wet. A slide gate’s motor post and guide post need concrete footings that go deeper than standard practice in other parts of Texas. We set footings below the active clay zone and use steel-reinforced pours so the posts don’t lean after a wet spring.
Sliding gates and wind load
A solid steel sliding gate acts like a sail in a Crowley thunderstorm. We factor wind load into the panel design, using heavier frame members and roller brackets rated for sustained gusts. Lightweight kits fail here; we don’t install them.
Gate Opener Installation in Crowley
Gate opener installation in Crowley starts at $900 for a basic swing arm actuator and runs up to $2,400 for a full sliding gate operator with battery backup and safety edges. The right opener depends on gate weight, frequency of use, and whether you want remote access from inside the house. In Crowley, where summer storms knock out power regularly, we recommend a battery backup on every automated gate. A power outage shouldn’t leave you locked out of your own driveway. Carver Gate Repair Fort Worth installs and services Viking, Ghost Controls, and DoorKing operators, among others.
Operators that handle heat and humidity
North Texas summers stress gate operators. Control boards overheat, limit switches stick, and plastic gears strip. We install operators with sealed control housings and metal drive gears where possible, and we match the operator to the gate’s actual weight, not a generic size chart.
Wiring runs and safety edges
A proper installation includes conduit-rated wire runs, code-compliant safety edges on automatic gates, and a grounded power supply. We run the electric and set the travel limits. No extension cords, no exposed wire, and no skipping the safety edge.
Trusted Brands We Service in Crowley
Carver Gate Repair Fort Worth trains its technicians on Viking, Ghost Controls, DoorKing, and Elite equipment. Because we work on these brands every week, we know their failure points and the right replacement parts to keep on hand. For a Crowley homeowner, that means if your Ghost Controls operator fails during a storm, we don’t have to guess which controller board fits. We stock what we need or source it same-week through our supply chain. Fast turnaround matters when your driveway gate is stuck closed at 6 a.m. and the school run isn’t going to wait.
Common Gate Installation Problems We See in Crowley Homes
- Clay soil heaving posts out of plumb. Expansive clay swells after rain and shrinks in drought. That seasonal cycle pushes hinge posts and latch posts out of line, which is why undersized footings fail within two to three years here.
- Wind-damaged hinges on solid wood gates. Crowley sits in a wind corridor where spring and summer storms push 60-mph gusts against tall fence and gate panels. Lightweight hinge screws strip from wood and the panel droops or drags.
- Operators lost to power surges. Lightning and grid fluctuations fry control boards. An opener installed without a surge protector or battery backup often dies within the first major storm season.
- Builders’ gates not built for daily use. Many Crowley homes came with a basic wood gate hung by the builder. It was a privacy screen, not an everyday entrance. Once homeowners automate it or use it daily, the hinge and post problems show up fast.
Our crews see these failures every week. That’s why we build differently: deeper footings, heavier hardware, and operators spec’d for the gate’s actual weight and use. Patching a builder’s gate usually costs more than installing it right the first time.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Installation in Crowley, TX
Here’s what Crowley homeowners can expect in writing before any work starts. A single wooden swing gate runs $1,850 to $3,400 installed, with steel swing gates beginning around $2,200. A steel sliding gate on a cantilever system typically falls between $2,400 and $5,800. Double gates sit in the $3,200 to $6,400 range because you’re hanging two panels with synchronized openers. Adding a gate opener costs $900 to $2,400, which includes the operator, wiring, safety edges, and programming. Pedestrian gates are the most straightforward install at $850 to $1,900.
| Gate Type | Typical Installed Price in Crowley |
|---|---|
| Pedestrian Gate | $850 – $1,900 |
| Wood Swing Gate (single) | $1,850 – $3,400 |
| Steel Swing Gate (single) | $2,200 – $4,200 |
| Sliding Gate (cantilever) | $2,400 – $5,800 |
| Double Gate | $3,200 – $6,400 |
| Gate Opener (installed) | $900 – $2,400 |
Every price is quoted in writing before any work begins, and the number does not move at the door. You want a free estimate for your specific gate, call (817) 840-7067.
We Also Serve Cities Near Crowley
While this page focuses on Gate Installation in Crowley, our crews also handle installations in Burleson, Mansfield, Fort Worth, and Haltom City. If you’re on the edge of town or in a neighboring ZIP code, call anyway. We’ll let you know if we cover your street and schedule a free measure if we do.
Serving Crowley, TX - Our Local Coverage Area
We’re based in the Crowley area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Crowley
Every automatic slide gate operator has a manual release mechanism, usually a lever or key located on the operator housing. On DoorKing and Viking sliding gate operators, you’ll find a release handle near the motor; turn or pull it to disengage the gearbox, then push the gate by hand along the track. On Ghost Controls units, the release is typically a small pull chain on the actuator. Familiarize yourself with your specific operator’s release procedure before the next storm hits, and call (817) 840-7067 if you can’t locate it or the gate won’t move after releasing.
Yes. We spec heavier frame members, use wind-rated hinges and latch hardware, and anchor posts in concrete footings below the clay line. For solid infill panels that catch wind, we reduce panel weight where possible or add mid-rail reinforcement. Our Gate Installation team sizes every component to the gate’s actual wind exposure, not a default chart.
That’s almost always clay soil movement in Crowley. Expansive clay swells after rain and shrinks in dry spells, shifting hinge posts and slab edges. A gate that was level in March can drag by June if the footings weren’t deep enough or the post wasn’t set in concrete below the active soil zone. We re-level the gate, correct the hardware, and if the footing was undersized, we dig and pour a proper one.
A slide gate needs its track or rollers cleared of dirt and debris, especially after storms push mud across driveways. It also needs periodic roller lubrication and motor limit checks. A swing gate needs its hinge hardware re-torqued and its posts checked for lean after wet seasons, since clay movement shows up faster on hinged panels. Both benefit from an annual inspection, but slide gates demand more regular attention in Crowley because track fouling is a constant issue on our soil.
Crowley requires permits for some driveway gate installations, particularly when the gate sits within a setback or easement or when electrical work is added for an opener. The rules change by subdivision and HOA, and some Crowley HOAs have their own standards for gate height, material, and color. Check with the City of Crowley building department and your HOA before installation. Call us at (817) 840-7067 and we’ll walk you through what we’ve seen pass and fail in Crowley’s review process.
Call Carver Gate Repair Fort Worth for Your Crowley Gate Installation
When you’re ready for a gate that stands up to wind, clay, and daily use, call (817) 840-7067. We’ll schedule a free measure, deliver a written price, and install the gate on a day that works for you. Carver Gate Repair Fort Worth is part of the Garrison Partners family, operating to The Garrison Standard since 2008. Every job includes a written guarantee and a crew that shows up squared away.
Written by Lonnie Burke, Owner at Carver Gate Repair Fort Worth, serving Crowley and the surrounding Dallas-Fort Worth metro.